Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: Parting out a 75. Lots of Parts!
Posted by: 75R1 Jun 20 2009, 07:44 PM
Parting out a 75.
I've had the car for sale for a long time, but now I need the space for another 914 and don’t have time to work on this car anymore. If you need any other parts, let me know. Most prices are negotiable. I can’t ship the larger stuff. I’ll keep this post updated with what’s still available. I'm located just above Philadelphia, PA.
Here’s a list of most parts I can think of: 1.7L engine with progressive carb - Ran when taken out of the car - $350Doors - $80Bumpers with bumper covers - $50Rebuilt Calipers - $250
Front Suspension - $100Dash pad (1) – only one small crack - $200 (Pending)Dash Pad (2) - See Pictures - $50Aftermarket running boards, rocker panels, wing - $200Riviera Wheels - $100
Lower Dash pad - $50Rotors - probably need to be turned - $60
Trailing Arms - A little bit rusty - $50Struts - $50Complete Side Shift Linkage - $50
Silver Button Gagues - $50
Seats - $75
Targa Top - $50Wiring Harness $75
Brake Lines $25
Gas Tank - $50
Headlight assemblies - $50
Heat exchangers - $15
Passenger side 1.7L Stainless Steel Heat Exchanger - $501.7 Leistritz Muffler – Type 4 – Painted with Stove Paint - $50Outer door locks – I don’t have any keys - $25 (Pending)
Didn't realize the ad was still active. The car is gone!
Thanks,
Geoff
Posted by: 75R1 Jun 21 2009, 09:20 AM
pics
Posted by: 75R1 Jun 21 2009, 09:23 AM
More
Posted by: 75R1 Jun 21 2009, 09:31 AM
Dash 2 - $50
Posted by: Spoke Jun 21 2009, 09:54 AM
Nice car in your sig!!
I'm looking for complete seat belts for driver and passenger sides.
Posted by: 75R1 Jun 22 2009, 09:23 PM
Haha! I wonder who put in all that work to get it looking that good? 
Thanks again for the deal.
I have a couple sets of seatbelts available. I'll get some pictures of what I have this weekend and get you a price.
Geoff
Nice car in your sig!!
I'm looking for complete seat belts for driver and passenger sides.
Posted by: dkos Jun 23 2009, 10:05 AM
windshield???
Posted by: ghuff Jun 23 2009, 01:19 PM
Sent you a PM. Need some big stuff.
Posted by: 75R1 Jun 23 2009, 07:47 PM
windshield???
Unfortunately, the windshield was cracked on this car. I do have three extra sets of windshield molding though!
Replied to all PMs.
Thanks,
Geoff
Posted by: 1975red914 Jun 25 2009, 09:00 AM
Parting out a 75.
I've had the car for sale for a long time, but now I need the space for another 914 and don’t have time to work on this car anymore. If you need any other parts, let me know. Most prices are negotiable. I can’t ship the larger stuff. I’ll keep this post updated with what’s still available. I'm located just above Philadelphia, PA.
Rebuilt Calipers - $250
Hi, Interested in what appears to be F & R caliper sets? Did you rebuild them, if so, briefly describe? Are they on the car now (pic) with fluid?
Is there an original interior lamp still in the car? If so, condition?
Thanking you in advance for my questions.
DuannePosted by: ghuff Jun 25 2009, 10:18 AM
How do the cowl and fenders look?
If you part the sheet metal I may want to drill out some spot welds and take the fenders/windshield surround etc. Or cut it somewhere perhaps.
Posted by: ConeDodger Jun 25 2009, 11:04 AM
I am looking for the plate that the fuel pump mounts to. It is found in the front trunk bulkhead in front of the fuel tank... got it? I don't need the pump just the plate.
Posted by: 75R1 Jun 27 2009, 08:11 PM
Parting out a 75.
I've had the car for sale for a long time, but now I need the space for another 914 and don’t have time to work on this car anymore. If you need any other parts, let me know. Most prices are negotiable. I can’t ship the larger stuff. I’ll keep this post updated with what’s still available. I'm located just above Philadelphia, PA.
Rebuilt Calipers - $250
Hi, Interested in what appears to be F & R caliper sets? Did you rebuild them, if so, briefly describe? Are they on the car now (pic) with fluid?
Is there an original interior lamp still in the car? If so, condition?
Thanking you in advance for my questions.
DuanneHi Duanne,
They were rebuilt by a friend of mine. He split the calipers, replaced all the seals and rubber, and honed the cylinders. He then polished the pistons and sand blasted the tops. They were sprayed with high temp caliper paint. I have a bunch of pictures from the process. If you PM me your email, I'll forward the pics to you. They were just bolted onto the car, but haven't had any fluid run through them. Unfortunately, the car didn't come with a backpad, so no interior light.
Thanks,
Geoff
Posted by: 75R1 Jun 27 2009, 08:29 PM
Some more pics of the requested items. Replied to all PMs; if I missed anything, just let me know.
Geoff
Seat Belts
Seats
Posted by: 75R1 Jun 27 2009, 08:37 PM
More... 
Cowl
Sail panel trim
Posted by: faux916 Jun 27 2009, 10:32 PM
PM sent. Thanks
Posted by: TMMorgan Jun 29 2009, 07:22 PM
Will you sell the parking brake (assembly)? All I have is the cable coming through the firewall and a rusted base (I will have to weld in a new base).
Posted by: 75R1 Jun 29 2009, 08:06 PM
Will you sell the parking brake (assembly)? All I have is the cable coming through the firewall and a rusted base (I will have to weld in a new base).
Are you just looking for the handle? I can't remember if the ratcheting teeth are part of the assembly... That, I can do. If you need more than that, just let me know or post up a pic and I'll check when I get home.
Thanks,
Geoff
Posted by: Geezer914 Jul 1 2009, 09:56 AM
Looking for a pair of drain funnels. Thanks, John
Posted by: 914runnow Jul 2 2009, 05:37 PM
Parting out a 75.
I've had the car for sale for a long time, but now I need the space for another 914 and don’t have time to work on this car anymore. If you need any other parts, let me know. Most prices are negotiable. I can’t ship the larger stuff. I’ll keep this post updated with what’s still available. I'm located just above Philadelphia, PA.
Here’s a list of most parts I can think of:
1.7L engine with progressive carb - Ran when taken out of the car - $350
Doors - $80
Bumpers with bumper covers - $50
Rebuilt Calipers - $250
Front Suspension - $100
Dash Pad (2) - See Pictures - $50
Aftermarket running boards, rocker panels, wing - $200
Riviera Wheels - $100
Lower Dash pad - $50
Rotors - probably need to be turned - $60
Trailing Arms - A little bit rusty - $50
Struts - $50
Complete Side Shift Linkage - $50
Silver Button Gagues - $50
Seats - $75
Targa Top - $50
Wiring Harness $75
Brake Lines $25
Gas Tank - $50
Headlight assemblies - $50
Heat exchangers - $15
Passenger side 1.7L Stainless Steel Heat Exchanger - $50
1.7 Leistritz Muffler – Type 4 – Painted with Stove Paint - $50
Or make an offer on the entire car. I need this gone by July 11!!! PM for more pictures.
Geoff
Sent you a PM re the fogs??I am back from the Parade..
Thanx Rx
Posted by: ghuff Jul 5 2009, 03:37 PM
Parting out a 75.
I've had the car for sale for a long time, but now I need the space for another 914 and don’t have time to work on this car anymore. If you need any other parts, let me know. Most prices are negotiable. I can’t ship the larger stuff. I’ll keep this post updated with what’s still available. I'm located just above Philadelphia, PA.
Here’s a list of most parts I can think of:
1.7L engine with progressive carb - Ran when taken out of the car - $350
Doors - $80
Bumpers with bumper covers - $50
Rebuilt Calipers - $250
Front Suspension - $100
Dash Pad (2) - See Pictures - $50
Aftermarket running boards, rocker panels, wing - $200
Riviera Wheels - $100
Lower Dash pad - $50
Rotors - probably need to be turned - $60
Trailing Arms - A little bit rusty - $50
Struts - $50
Complete Side Shift Linkage - $50
Silver Button Gagues - $50
Seats - $75
Targa Top - $50
Wiring Harness $75
Brake Lines $25
Gas Tank - $50
Headlight assemblies - $50
Heat exchangers - $15
Passenger side 1.7L Stainless Steel Heat Exchanger - $50
1.7 Leistritz Muffler – Type 4 – Painted with Stove Paint - $50
Or make an offer on the entire car. I need this gone by July 11!!! PM for more pictures.
Geoff
Sent you a PM re the fogs??I am back from the Parade..
Thanx Rx
Sending another PM, but I need the front suspension and rear trailing arms please.
I sent you a PM but no reply? I also may want the front/rear bumpers but need to see them in person. The plastic on mine are warped and goofy looking.
Minimum I will get the trailing arms and front suspension however.
Sending pm #2
Posted by: mattp Jul 6 2009, 01:07 PM
I need the two little white plastic wheels that the springs (torsion bar) that prop open the rear trunk run on. got em?
Posted by: bandjoey Aug 6 2009, 10:59 PM
the passenger seat belt if it retracts ok. shipped to bedford tx 76021? thanks bill
Posted by: pilothyer Aug 8 2009, 04:55 PM
Interested in the complete sideshift linkage, I will need the crooked bar at the rear, as well as the straight one that connects to the shifter, along with all the couplers...with the set screws.....Let me know by posting or by PM................Thanks.........Jerry
Posted by: bandjoey Aug 8 2009, 09:19 PM
don'd need a seatbelt anymore...found one
what was the condition of the muffler - before paint, I mean? Is the picture flipped or is the exhaust pipe on the right side? shipping cost to tx 76021? Thanks
Posted by: smileysrv Aug 13 2009, 11:56 AM
I need the right side engine tin that has removable section for A/C mine is missing that corner. Also I am in need of the Y shaped heater connectors and ducting to get fan housing to heater box. Let me know if you have this stuff.
Posted by: Johnhoney Aug 14 2009, 01:54 PM
Do you have a picture of the top and what shape. Very interested. John
Posted by: JOE M Aug 14 2009, 02:55 PM
do you still have the heat exchangers and the distributor?
Posted by: jcb29 May 27 2010, 10:34 PM
looking for the front mount fuel pump (non working OK) the mounting brackets and the blister to which it mounts.
Posted by: eyecolor May 30 2010, 07:55 PM
Any chance you have a parking brake handle?
Posted by: poorsche914 May 31 2010, 08:06 PM
I will take the
Passenger side 1.7L Stainless Steel Heat Exchanger - $50
Let me know how much shipped to 37876.
Also, does the car have a rear sway bar? I am looking for the bottom shock bolts with the sway bar nub.
Thanks.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)