Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS- 2.0 Liter stuff from 73 & 74's
Posted by: Thomas J Bliznik Aug 9 2009, 06:25 PM
Here's a few items for your 2.0 liter 914. Most of the stuff came off a 73 & 74.
I forgot to price the 73 2.0 liter throttle body. It's $50.00
Everything is plus shipping.
Will entertain B.O's & discounts to Zack's Elvis friends. 
Tom
Attached thumbnail(s)
Posted by: 1988Hawk Aug 9 2009, 08:18 PM
Here's a few items for your 2.0 liter 914. Most of the stuff came off a 73 & 74.
I forgot to price the 73 2.0 liter throttle body. It's $50.00
Everything is plus shipping.
Will entertain B.O's & discounts to Zack's Elvis friends.
Tom
I'll take the brain.
Jim
Posted by: Thomas J Bliznik Aug 9 2009, 08:58 PM
Here's a few items for your 2.0 liter 914. Most of the stuff came off a 73 & 74.
I forgot to price the 73 2.0 liter throttle body. It's $50.00
Everything is plus shipping.
Will entertain B.O's & discounts to Zack's Elvis friends.
Tom
I'll take the brain.
Jim
Jim,
It's yours if you still want it. I don't do paypal, just personal check, BMO or cash. Shipping & packaging will be another $5.00 or $25.00 shipped to you.
BTW: It's part # 039.906.0?1 & 0.280.000.044
Give me your address, etc on my personal email
tjbliznik@ameritech.net
Tom
Posted by: Thomas J Bliznik Aug 9 2009, 09:03 PM
Another 2.0 liter F.I. "Air Distributor" box. Powder coated and real mint CW. It fits other 73 to 76's. but it's off a 73.
Price: $75.00 plus shipping.
Tom
Attached thumbnail(s)
Posted by: pilothyer Aug 10 2009, 09:34 AM
Hello Sir....I will take the alternator wiring harness, shipping will be to 35603......Thanks.......Jerry
Posted by: Thomas J Bliznik Aug 10 2009, 10:38 AM
Hello Sir....I will take the alternator wiring harness, shipping will be to 35603......Thanks.......Jerry
Jerry,
I sent you a PM with more details.
Tom
Posted by: Thomas J Bliznik Aug 10 2009, 05:36 PM
More:
Here's a D-Jet 2.0 Liter Distributor complete with trigger points, cap, points, etc. Condition is excellent with no shaft wobble. It's tight with everything included.
They don't make these anymore & when was the last time you saw one in this condition. This one came off a 73 or maybe a 74?? Can't remember.
You need this to complete your D-Jet F.I. System. 
Price: $225.00 with shipping included anywhere U.S. & Canada.
Attached thumbnail(s)
Attached image(s)
Posted by: Thomas J Bliznik Aug 10 2009, 05:51 PM
More:
MPS - Manifold Pressure Senser #43 part # 0290.100.043 (also # 0?9.906.051).
It came off a running 1974 that was in a wreck. It's been on the shelf a long time, but it holds pressure. Notice the factory epoxy is removed on the screw, but the factory rivets are still there. This is one of my stash of (4) MPS. This one goes first, then the prices go way up, up, up. ![popcorn[1].gif](style_emoticons/default/popcorn[1].gif)
Price: $125.00 with shipping anywhere U.S. & Canada.
Tom
Attached thumbnail(s)
Attached image(s)
Posted by: Thomas J Bliznik Aug 10 2009, 05:53 PM
More:
MPS - Manifold Pressure Senser #43 part # 0290.100.043 (also # 0?9.906.051).
It came off a running 1974 that was in a wreck. It's been on the shelf a long time, but it holds pressure. Notice the factory epoxy is removed on the screw, but the factory rivets are still there. This is one of my stash of (4) MPS. This one goes first, then the prices go way up, up, up.
Price: $125.00 with shipping anywhere U.S. & Canada.
Tom
Opps, that's the other post.
Here are the photo's.
Attached image(s)
Posted by: Thomas J Bliznik Aug 10 2009, 06:54 PM
More:
Corrected photo post.
F.S. set of (4) 2.0 Liter Fuel Injectors made by "PYTHON" with rubber hoses. I don't know much about this brand, they were put on my 74 D-Jet F.I. 3-years ago during a tune-up by a local 914 Porsche shop. I was told they were correct for my system and they performed very well. I put them along side my spare green injectors for comparison. I am not selling the green ones, they are my spares after finding new green ones that are extremely hard to find (and expensive).
Price: $150.00 for the set of (4) with shipping anywhere U.S. & Canada.
Tom
Attached thumbnail(s)
Attached image(s)
Posted by: Thomas J Bliznik Aug 10 2009, 07:00 PM
More:
Not F.I. stuff, but a nice condition "R" right side parking light. One half of a clip is missing and the rubber needs replacement. The plastic lens is very good and a small blemish will polish out.
Price: $50.00 with shipping anywhere U.S & Canada.
Tom
BTW: That's all for awhile. I found a box of tool kit stuff, wrenchs, screwdrivers, etc. anyone interested???? 
Attached thumbnail(s)
Posted by: Thomas J Bliznik Aug 11 2009, 04:14 PM
More:
Not F.I. stuff, but a nice condition "R" right side parking light. One half of a clip is missing and the rubber needs replacement. The plastic lens is very good and a small blemish will polish out.
Price: $50.00 with shipping anywhere U.S & Canada.
Tom
BTW: That's all for awhile. I found a box of tool kit stuff, wrenchs, screwdrivers, etc. anyone interested????
Opps, I am overpriced on this parking light.
New Price: $25.00 with shipping anywhere U.S. & Canada
Tom
Posted by: smileysrv Aug 13 2009, 11:52 AM
Do you have the Y shaped ducts that connect fan housing to heater boxes? also the square tio round duct adapters? I also need a right side engine tin, mine was cut off for A/C?
Posted by: Thomas J Bliznik Aug 13 2009, 06:22 PM
Do you have the Y shaped ducts that connect fan housing to heater boxes? also the square tio round duct adapters? I also need a right side engine tin, mine was cut off for A/C?
Smileysrv,
No, I don't have those pieces. I suggest you post a WTB post & maybe someone will respond. If you can post a photo from the parts book, that always helps.
BTW: Most of the stuff on this post is sold. In a few weeks I'll put together another list of misc. parts.
Tom
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)