Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Front calipers, rotors, and new bearings

Posted by: turnaround89 Aug 11 2009, 11:03 PM

I went with the 5 lug setup and everything is brand new, rotors and pads may have 50 miles on them, rebuilt calipers(honed cylinders, new seals, etc), brand new bearings and bearing races installed in the rotors. Everything came off a 72 914, the paint on the rotors isn't the greatest because everything is getting moved around in the garage a lot lately. Price $100.00 for everything plus shipping
IPB Image

Posted by: turnaround89 Aug 15 2009, 06:28 AM

bump. price reduced

Posted by: crxnug Aug 16 2009, 06:01 PM

pm sent

Posted by: turnaround89 Aug 24 2009, 07:54 AM

Bump. Still Available

Posted by: JazonJJordan Aug 24 2009, 09:19 AM

Sounds good. PM sent.

QUOTE(turnaround89 @ Aug 24 2009, 09:54 AM)

Bump. Still Available

Posted by: tat2dphreak Aug 24 2009, 09:22 AM

are these early 72 or late 72? I ask b/c Jazon has a 73 in the signature, and I'd hate for these to be the early 72s (for 70-72)

Posted by: JazonJJordan Aug 24 2009, 09:26 AM

Thanks for the catch-and-save, you are quite right. I am still checking on them as I might have a early 914 in my future too; not certain. Still much thanks! Jzn

BTW that excellent avitar is still very distracting...reminds me of my old (evil-smile) girlfriend...(sigh..)..: c )))

Posted by: tat2dphreak Aug 24 2009, 10:16 AM

The factory changed the strut housing, ball joint, caliper and rotor at VIN 4722919032

and seem to have changed even more stuff, too, but those are for sure...

Posted by: turnaround89 Aug 24 2009, 11:31 AM

these are for an early 914, 70 -72...my cars vin is 4722900319. Hope this helps

Posted by: JazonJJordan Aug 24 2009, 11:40 AM

No problem. I need a late set. They will quickly find a home I bet. Thank you -Jzn

QUOTE(turnaround89 @ Aug 24 2009, 01:31 PM)

these are for an early 914, 70 -72...my cars vin is 4722900319. Hope this helps

Posted by: turnaround89 Aug 28 2009, 01:45 PM

Still Available