Printable Version of Topic

Posted by: TheMirror Oct 13 2009, 10:23 PM

Almost done here.....

I'm looking for the diameter and standard thickness of the rear 914-6 brake rotors. If I'm not mistaken, these are bespoke to the 914-6 and not shared with any 911 model.

And.....for super awesome extra credit, can anyone tell me the diameter of the rear caliper pistons for those cars?

Thanks,
-Mirror

Posted by: SLITS Oct 13 2009, 10:38 PM

Don't know the rotors. They are specific to the 914/6. Elebens have the parking brake housing.

38mm as I remember. /4 is 33mm

Larger castings than a /4.

Posted by: Larry Hubby Oct 13 2009, 11:08 PM

914/6 rear brake rotor is 11.260" in diameter and .591" thick when new. The wear limit on the thickness is .374". Slits is correct as to the caliper piston diameters.

Posted by: 914Sixer Oct 14 2009, 08:34 AM

Oddly enough the -6 rotor has a 911 part number.

901.352.401.18 Stock Rotor

901.352.041.12 Vented Rotor

Posted by: 6freak Oct 14 2009, 09:35 AM

YA THINK!...Look at a few more parts from the running gear and see what kind of #`s you find.............................




just try`n to be a wise guy

Posted by: Eric_Shea Oct 14 2009, 12:12 PM

Good job...

Posted by: TheMirror Oct 14 2009, 04:23 PM

Outstanding, thanks a million!

-Mirror

Posted by: 914Sixer Oct 14 2009, 07:50 PM

The rotor numbers I posted are 914-6 specific. You will not find them listed in the 911 parts books/PET.

Posted by: bcheney Oct 1 2012, 05:48 AM

**