Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ points

Posted by: oldschool Oct 20 2009, 08:14 PM

can i clean the points with contact cleaner?
sorry bad photos btw are the side contact need to have the same gap?

Attached image(s)

Posted by: oldschool Oct 20 2009, 08:24 PM

QUOTE(oldschool @ Oct 20 2009, 07:14 PM)

can i clean the points with contact cleaner?
sorry bad photos btw are the side contact need to have the same gap?

Attached image(s)

Posted by: neil30076 Oct 20 2009, 08:35 PM

You can clean them with a very light ( 600 grade) emory paper, but once the face is worn off it won't last long.
Buy a new set - good for the next 6k miles at least!

Posted by: Bartlett 914 Oct 20 2009, 09:33 PM

QUOTE(neil30076 @ Oct 20 2009, 09:35 PM)

You can clean them with a very light ( 600 grade) emory paper, but once the face is worn off it won't last long.
Buy a new set - good for the next 6k miles at least!

I was always under the understanding that sanding (enory parer including) contacts was bad. Maybe a file but not sanding.

Posted by: oldschool Oct 20 2009, 09:38 PM

QUOTE(Bartlett 914 @ Oct 20 2009, 08:33 PM)

QUOTE(neil30076 @ Oct 20 2009, 09:35 PM)

You can clean them with a very light ( 600 grade) emory paper, but once the face is worn off it won't last long.
Buy a new set - good for the next 6k miles at least!

I was always under the understanding that sanding (enory parer including) contacts was bad. Maybe a file but not sanding.

I was talking about the injection unit not the dizzy?