Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Newbie Question of the Day:

Posted by: RiqueMar Nov 5 2009, 11:05 AM

Ok, so it's about that time to put the engine in, and I remembered that I need to replace the fuel lines. I've been looking at the ones on Pelican, but don't know what type I need 6,7, or 8 mm ID if I'm running carbs?

Posted by: URY914 Nov 5 2009, 11:33 AM

You'll need to measure the fitting on the carb to see what hose you'll need.

Posted by: RiqueMar Nov 5 2009, 12:42 PM

QUOTE(URY914 @ Nov 5 2009, 09:33 AM)

You'll need to measure the fitting on the carb to see what hose you'll need.

So... if it fits, use it?

Posted by: underthetire Nov 5 2009, 02:32 PM

Well, sort of. If it's not to loose or to tight. I recommend the high pressure stuff even with carbs in CA. The "clean" fuel we have will break down std lines and send tiny debris in to your jets IMO. The high pressure stuff has a liner in it.