Printable Version of Topic

Posted by: underthetire Nov 9 2009, 09:44 AM

http://www.harborfreightusa.com/usa/common/displayCoupon.do?week=4909&campaign=RetailB&page=4909_retailB.html&r=7000_599085&cust=78096260905&keycode=0000

Posted by: charliew Nov 9 2009, 10:03 AM

Fastenal sells a really expensive grinder It is self cleaning or sealed, maybe german made, but you could probably buy 10 hf tools in it's place. If you will be sanding fiberglass i would just get the hf tool because the fg is really abrasive to the inside of the tool. I like makita 4 inch grinders they fit ny hand pretty good but they are more expensive than the bulkier hf tool. I have both and will use the mikita more often than the hf tool.

Posted by: J P Stein Nov 9 2009, 10:15 AM

I have that HF right angle grinder...or sumthin' similar to it. They started out at bout 30 bucks 10ish years back....then $15 bout 5 years back when the old one puked. I work them pretty hard for a few weeks a year, it seems. Keep them oiled and and they're not that bad. Good ones are pricy so I finger I'm ahead of the game.


Attached thumbnail(s)

Posted by: ConeDodger Nov 9 2009, 10:32 AM

QUOTE(underthetire @ Nov 9 2009, 07:44 AM)

Posted by: raw1298 Nov 9 2009, 10:47 AM

Thanks! getting ready to go to HF today and I need one of those grinders and the bits to go with it. That will work great in the hell hole that I am working on!

Posted by: underthetire Nov 9 2009, 12:29 PM

I need to go this week to, so thats why i posted it. I wet sanded my old paint (PO) and need to buff it out now. L80E is not as off white as I thought ! The windsor white from duplicolor is a perfect match though!

Posted by: Sleepin Nov 10 2009, 10:11 AM

I wonder if we should have an "official" coupon thread?

autoanything.com $25 off any purchase over $199 with free shipping (ends 11/11/09):
Enter code ENV9102CC in cart

Posted by: Dr Evil Nov 10 2009, 10:29 AM

I need to go today I bought an IR propane heater unit that mounts on top of a 20# tank. Used it last night and am confident that I wont freeze my nuts off this winter

Posted by: underthetire Nov 10 2009, 11:08 AM

QUOTE(Dr Evil @ Nov 10 2009, 08:29 AM)

I need to go today I bought an IR propane heater unit that mounts on top of a 20# tank. Used it last night and am confident that I wont freeze my nuts off this winter

Posted by: strawman Nov 10 2009, 08:07 PM

QUOTE(underthetire @ Nov 10 2009, 09:08 AM)

Posted by: Todd Enlund Nov 11 2009, 12:13 PM

Harbor Freight and more:

http://www.black-friday.net/

Posted by: Cheapsnake Nov 11 2009, 08:31 PM

Keep em coming. I can always use an excuse to got to HF and buy a tool I never thought I'd own (or need). BTW, I bought one of their right angle grinders about 5 years ago to do some body work, figuring for $19.95 it'd be toast by the time I was done. It's going strong today with no signs of quitting.

Posted by: underthetire Nov 12 2009, 11:52 AM

New one
http://www.harborfreightusa.com/usa/common/displayCoupon.do?week=4609&campaign=RetailB&page=4609_retailB.html&r=6673_935070&cust=78096260905&keycode=0000

Posted by: underthetire Dec 7 2009, 11:50 AM

New one (1st post)

Posted by: nycchef Dec 7 2009, 12:14 PM

QUOTE(underthetire @ Dec 7 2009, 09:50 AM)

Posted by: type11969 Dec 7 2009, 02:28 PM

There is one in Ewing, NJ unless they shut it down in the last month or two. 10 minutes or so from Trenton.

Posted by: r_towle Dec 7 2009, 06:29 PM

Hey SirAndy,

I amy be easy to amuse, but the technology used to make the borchure work is quite cool...the window was the wrong size, but I really like what they did...in concept.

What is it they are doing/using?
(click on the brochure, click on a picture..)

Rich

Posted by: tod914 Dec 7 2009, 08:31 PM

Finally went over to the store in Saddle Brook. Man what a selection. Picked up a 500 watt lamp for $30 to use for curing paint on some winter resto parts. Might grab one more and put your coupons to use Unfortunetly no more 1200 watt infrared light available there.