Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Best way to repair these rust holes?
Posted by: my928s4 Nov 21 2009, 03:26 PM
Was cleaning the area with the wire brush attachment and this area was worse than I thought. Just wondering what is the right way to do this before I go and make a mess of things.
Posted by: Rico Suave Nov 21 2009, 03:43 PM
Wire fed welder.....
Posted by: 9146986 Nov 21 2009, 04:08 PM
Yes, the absolute best way to repair this is with metal. However an area this small can also be suitably repaired with POR15 and PORPatch, which is an epoxy.
Unless this is a concours repair, a cold patch could be the easiest way to go.
Posted by: my928s4 Nov 21 2009, 06:57 PM
QUOTE(Rico Suave @ Nov 21 2009, 01:43 PM) 
Wire fed welder.....
My main concern there was those holes were going to get a whole bunch bigger before you could find something to weld to.
QUOTE(9146986 @ Nov 21 2009, 02:08 PM)
Yes, the absolute best way to repair this is with metal. However an area this small can also be suitably repaired with POR15 and PORPatch, which is an epoxy.
Unless this is a concours repair, a cold patch could be the easiest way to go.
This area will be hidden with the seal anyway so that is an option.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)