Exterior door handle stopped working. I removed the panel and found a piece of plastic laying in the bottom of the door. Must be apart of the assy. that pushes against the fork to release the latch. I removed the allen screw trying to get the handle off. But there is a screw with an acorn nut that turns with the nut..
can't get it free. HELP!
Both are common problems.
The plastic piece can be replaced. Pelican has the part for $17.99 or so.
The spinning stud is another problem but can also be fixed with a drill and a sharp bit. After you drill it out you'll have to use a 6 mm bolt and nut. If your good with a drill or have a drill press you can counter sink the bolt into the mounting tab.
After you break the mounting tab send it to me and I'll fix it for you. I'm having a UPC sale on my tab fix these days. The new price is $25.00 which is a hell of a savings over the standard price. Here is a pic.......
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)