Printable Version of Topic

Posted by: Mikey914 Nov 22 2009, 02:09 PM

I know a few of you needed these and had asked to have these made.

I just got in the materials and will be playing around while I have some down time this next weekend. I have located and obtained a material the is similar to the OEM so it will compress well without weeping in through the housing. I anticipate having the first ones in Hand to try the following Monday. So just a heads up for those of you that will be needing these.

I'm also making some improvements on these compared to the others that were available out of Canada, and as I've been told are no longer available.

Pricing will be good (better than what they were previously available for) I will do a pre sale once I have the costs figured out. It's going to take some time (and trial and error) to work out the details and check the fitment, but I have been playing around with another material and have a template close, so hopefully some tweaking on what I've already done will yield the results desired

$24

Posted by: jsayre914 Nov 22 2009, 02:16 PM

Im in.

i just got your pm.

Posted by: westo2 Nov 22 2009, 02:25 PM

I'm in

-Weston

Posted by: jmmotorsports Nov 22 2009, 02:32 PM

I am in. Will need 3 sets.

Jerry

Posted by: Kansas 914 Nov 22 2009, 02:32 PM

QUOTE(Mikey914 @ Nov 22 2009, 02:09 PM)

Posted by: steveherman Nov 22 2009, 02:48 PM

MAYBE...
price determines for me...

Posted by: Daiberl Nov 22 2009, 04:00 PM

I need one set.

Posted by: PH1 Nov 22 2009, 05:43 PM

I need one set.

Thanks,

Kelvin

Posted by: jim912928 Nov 22 2009, 06:30 PM

I need one set

Posted by: jim_hoyland Nov 22 2009, 06:38 PM

I'm in for a pair. + one pair for Meng Foong in Singapore ( see PM)

Posted by: computers4kids Nov 22 2009, 07:11 PM

Yes, a pair.
Edit: I'll take two sets.

Posted by: Gint Nov 22 2009, 07:37 PM

I'm in for two sets Mark.

Posted by: rudedude Nov 22 2009, 08:13 PM

I need 2 sets.
Thanks Mark!

Posted by: championgt1 Nov 22 2009, 10:10 PM

I'm in!

Posted by: Mikey914 Nov 22 2009, 10:34 PM

QUOTE(steveherman @ Nov 22 2009, 12:48 PM)

Posted by: jaxdream Nov 22 2009, 10:40 PM

Alright !!! Yes I'm in for a set , price is great also !!!

Jaxdream

Posted by: bdstone914 Nov 22 2009, 10:45 PM

Are these the one between the lens and housing or housing and body?

Either way I will get a set or two.
Bruce


Just to keep those of you that want these, they are on the way!
[/quote]

Posted by: Mikey914 Nov 23 2009, 01:49 AM

These are the larger ones that go between the housing and the body.

Posted by: oldschool Nov 23 2009, 01:56 AM

QUOTE(Mikey914 @ Nov 22 2009, 11:49 PM)

Posted by: craig downs Nov 23 2009, 01:57 AM

I would like a set.

Posted by: veltror Nov 23 2009, 04:18 AM

I will go for a set also...

Posted by: Racer Chris Nov 23 2009, 05:21 AM

I am interested in purchasing multiple sets.

Posted by: SCor914 Nov 23 2009, 07:14 AM

Yes please....one set here.....for the occasional desert departure

Posted by: DEC Nov 23 2009, 08:38 AM

I'm in for 3 Sets, send you the list for further seals I need in the next days

Wilco

Posted by: kconway Nov 23 2009, 09:04 AM

Nice! I'll take a set.

Kevin

Posted by: warrenoliver Nov 23 2009, 10:45 AM

I'm in for a set.

Warrenoliver

Posted by: Geezer914 Nov 23 2009, 10:51 AM

I'm in for a set. Thanks

Posted by: rfuerst911sc Nov 23 2009, 12:38 PM

Put me down for a set. Thanks

Posted by: blackmoon Nov 23 2009, 12:40 PM

I'm in

Posted by: SGB Nov 23 2009, 01:18 PM

Just one set.

Thanks Mark!

Posted by: montoya 73 2.0 Nov 23 2009, 03:38 PM

Mark, I'd be in for atleast two sets.

Posted by: 6freak Nov 23 2009, 03:42 PM

3 SETS...BEFORE XMAS???that would be cool

Posted by: SirAndy Nov 23 2009, 03:57 PM

Me too! One set please ... Do you take checks? I don't do paypal ...

Andy

Posted by: porsche913b_sp Nov 23 2009, 06:30 PM

i'm down for 2 sets

thanks

Posted by: dlestep Nov 23 2009, 06:55 PM

...I'd like a set as well ! tks
Dave

Posted by: Mikey914 Nov 23 2009, 06:59 PM

QUOTE(6freak @ Nov 23 2009, 01:42 PM)

Posted by: bandjoey Nov 23 2009, 07:07 PM

YES 1 SET

Posted by: ericread Nov 23 2009, 07:12 PM

Any chance you could post a picture of what the gaskets look like? I'll probably order a set, but I'd really like to see a set.

My thanks.

Eric

Posted by: d914 Nov 23 2009, 08:08 PM

one please

Posted by: agentblr Nov 23 2009, 08:14 PM

I'm in for a set

Posted by: lucky25 Nov 23 2009, 08:31 PM

I am in for a set

Posted by: EJP914 Nov 23 2009, 08:41 PM

I'm in for a set.

Posted by: TravisG Nov 23 2009, 08:46 PM

one set Please.

Posted by: 516randy Nov 23 2009, 10:47 PM

a set for me.

Posted by: 6freak Nov 23 2009, 11:30 PM

QUOTE(Mikey914 @ Nov 23 2009, 04:59 PM)

QUOTE(6freak @ Nov 23 2009, 01:42 PM)

3 SETS...BEFORE XMAS???that would be cool

These will ship out before Christmass, and I anticipate they would be recieved domestically prior to Christmass. I'll be able to firm up time lines on Monday if this next week. I just need to assure they will do what they have been designed to do.

Thanks,

Mark

Posted by: Mikey914 Nov 23 2009, 11:50 PM

QUOTE(ericread @ Nov 23 2009, 05:12 PM)

Posted by: Mikey914 Nov 23 2009, 11:52 PM

QUOTE(SirAndy @ Nov 23 2009, 01:57 PM)

Me too! One set please ... Do you take checks? I don't do paypal ...

Andy

Posted by: rfuerst911sc Nov 24 2009, 03:59 PM

Are they going to be thicker ? It seems to me they should be so they compress to make a good seal as the housing is tightened into the opening.

Posted by: charliew Nov 24 2009, 09:51 PM

I also need a set.

Posted by: Mikey914 Nov 25 2009, 03:07 AM

QUOTE(rfuerst911sc @ Nov 24 2009, 01:59 PM)

Posted by: Mikey914 Nov 30 2009, 06:48 PM

I've got the pricing finalized just need to get the jet dialed in to make cleaner cuts. I should be able to post the pictures in the next day or two. I'm also working on a few other surprises that you may want in on.
I'll have posted shortly, and will be sending out the form letter with instructions for payment on these on Wed Dec 2nd.

Thanks all.

Posted by: Al Meredith Nov 30 2009, 07:19 PM

I'll take two sets , Al

Posted by: iamchappy Nov 30 2009, 07:22 PM

I'll take a set...

Posted by: Pat Garvey Nov 30 2009, 07:55 PM

Mark,
I'll take a set for two lenses.

With the stuff you've come up with a fool would pass these off.

PM me when ready to deliver.
Pat

Posted by: Rotary'14 Nov 30 2009, 07:57 PM

I would like 2 sets.

Thanks!

-Robert

Posted by: rdr Nov 30 2009, 08:01 PM

Put me down for 2 sets.... Woo Hoo!

Posted by: pjf Nov 30 2009, 08:04 PM

I'd like a set.

Posted by: JRust Nov 30 2009, 08:11 PM

In for 2 sets! Thanks

Posted by: kconway Nov 30 2009, 08:26 PM

1 set for me please.
Kev

Posted by: StratPlayer Nov 30 2009, 09:21 PM

1 set here.

Posted by: MDG Nov 30 2009, 09:38 PM

I'll take two sets please, Mark. If you haven't sent my other stuff yet you can wait until these are ready and send together.

mike

Posted by: bigkensteele Nov 30 2009, 10:33 PM

Mark, please put me down for 2 sets.
Thanks,
Ken

Posted by: smg914 Nov 30 2009, 11:22 PM

I'm in for one set.

Posted by: kconway Dec 1 2009, 12:01 AM

Mark,
Just incase you were looking for your next project. I believe this seal to be NLA. I'd be surprised if I'm the only one (and the one add in the classified section) who need this. I have heard that there is a repro part available but I have also heard it isn't a very good repro as it doesn't fit well and it's rather expensive (sorry George). Just what I heard but cannot confirm.
Kev

Posted by: veltror Dec 1 2009, 06:38 AM

As set for me Mark please,

Posted by: AvalonFal Dec 1 2009, 07:24 AM

Add a set for me.

Paul

Posted by: sean_v8_914 Dec 1 2009, 07:40 AM

914Rubber-south needs 3 sets

Posted by: Geezer914 Dec 1 2009, 07:55 AM

What is your paypal account to send the payment?

Posted by: SGB Dec 1 2009, 07:56 AM

I'll second Kev's recommendation for the vent intake seal...

Posted by: tradisrad Dec 1 2009, 08:01 AM

I'm in for a set or two.
Also vent seal is a hard to find item. There iare two different vent seals. An early one that does not have the leaf screen and a later one that does have the leaf screen.
BTW it is possbile to upgrade the early cars to fit a late leaf screen.

Posted by: tod914 Dec 1 2009, 08:07 AM

Count me in for an airbox seal or two if you decide to make them Mark.

Posted by: 6freak Dec 1 2009, 08:34 AM

3 sets ...please ...LMK were to send the check

Thanks

Posted by: db9146 Dec 1 2009, 08:37 AM

I'll take two sets, please.

Posted by: curt914 Dec 1 2009, 09:36 AM

Hello

Please put my name on the list for one set.

Also just added my name to the list for one of those windshield trim removal tools if available.

Thanks

Curt

Do I paypal you now... later, not sure

Posted by: daveyboybadion Dec 1 2009, 09:44 AM

Hi Mark, I'm in for one set, thanks...daveyboy

Posted by: dyw914 Dec 1 2009, 09:53 AM

I'll take two sets. Thanks.

Posted by: John Jentz Dec 1 2009, 10:05 AM

I'll take a set. I'll second the vent seal, I tried the "other repo" and it didn't fit and tore in the process.

Posted by: Markl Dec 1 2009, 12:17 PM

I'll take a set

Posted by: ClayPerrine Dec 1 2009, 08:16 PM

I would like two sets!

Posted by: anderssj Dec 1 2009, 08:37 PM

Two sets, please . . . let me know paypal address.

Thanks!

Steve A-

BTW, the cowl vent/blower motor seal is a great idea . . . .

Posted by: poorsche914 Dec 1 2009, 09:34 PM

Please add me to the list for one set.
thanks.

Posted by: RohJay Dec 1 2009, 10:32 PM

Please put me down for ONE set.
Would like to combine this with a couple of your other items.
Will PM details.
Thanks

Posted by: Duffster Dec 1 2009, 10:36 PM

+1 for me!

Posted by: 914_teener Dec 1 2009, 11:21 PM

I'm in for one set.....

Posted by: zymurgist Dec 1 2009, 11:23 PM

I'll take one set.

Posted by: MikeSpraggi Dec 1 2009, 11:28 PM

I need two sets and in fact will buy two sets.

Thanks

Posted by: KevinP Dec 1 2009, 11:33 PM

Mark, I'm in for two sets!

KP

Posted by: arvcube Dec 2 2009, 12:32 AM

I need a set (like now) =). sent PM. thanks

Posted by: ConeDodger Dec 2 2009, 12:47 AM

I want what everyone else is saying they want! What is it? Oh, never mind, I will take one set!

Posted by: shelby/914 Dec 2 2009, 12:57 AM

2 sets please, Dan

Posted by: jim_hoyland Dec 2 2009, 01:04 PM

Update me for two sets, not one as originally requested. See pm regarding shipping one pair to Singapore.

Posted by: maf914 Dec 2 2009, 01:27 PM

Mark, two sets please.

Thanks,
Mike

Posted by: Mikey914 Dec 2 2009, 07:09 PM

I'm going to extend one more day as we have a new nozzle that was supposed to be here today that's apparently a day late. I traced it and the manufacturer shipped out a day after the order but it's comming overnight.

I will have pictures tomorrow and will be sending out the form letter with purchase instructions.

One more day.

Posted by: Grimstead Dec 2 2009, 07:14 PM

Just saw this, please add me in for a set as well.
Thanks!

Posted by: tsbcm Dec 3 2009, 06:54 AM

Mark

Please put me down for one set.

Thanks
Tim

Posted by: turboturtle Dec 3 2009, 08:18 AM

Sorry for not chiming in earlier, but I too would like a pair of taillight gaskets. Whatever you do to inform us when and how much, jus let me know.

Thanks,
Bob

Posted by: PThompson509 Dec 3 2009, 08:48 AM

I'm in for a set as well.

Posted by: Grimstead Dec 3 2009, 10:33 AM

QUOTE(kconway @ Nov 30 2009, 10:01 PM)

Mark,
Just incase you were looking for your next project. I believe this seal to be NLA. I'd be surprised if I'm the only one (and the one add in the classified section) who need this. I have heard that there is a repro part available but I have also heard it isn't a very good repro as it doesn't fit well and it's rather expensive (sorry George). Just what I heard but cannot confirm.
Kev

Posted by: ME733 Dec 3 2009, 11:45 AM

.....thanks for doing this project.......I would like a set of taillight gaskets when available....me733.... ...thanks.

Posted by: campbellcj Dec 3 2009, 12:06 PM

I will take (2) sets as well. Looks like a popular item!

Thanks,

Posted by: Mikey914 Dec 3 2009, 02:38 PM

I am looking at the gasket for the airbox. I know I can make a part that works better and will last longer. I'll need a week or two to really evaluate. I'll post more in a later thread, but it does need some improvement in this area.

Posted by: Larouex Dec 3 2009, 02:41 PM

Put me down for 2 sets

Larouex

Posted by: charliew Dec 3 2009, 02:45 PM

I will also want a airbox gasket and can wait till the airbox gasket is ready to get the tail light housing gaskets so they can be shipped at the same time.

Posted by: FourBlades Dec 3 2009, 03:00 PM

I am in for 2 sets.

John

Posted by: Eric_Shea Dec 3 2009, 04:43 PM

in

Posted by: nsr-jamie Dec 3 2009, 05:11 PM

Add me to the list too!! Jamie in Japan, thanks for the other stuff....don't need shipping right away so they can wait as I need to order a few other small things too, thanks!!

Jamie

Posted by: SGB Dec 3 2009, 06:52 PM

Just checking back...

Posted by: craig downs Dec 3 2009, 10:28 PM

QUOTE(Mikey914 @ Dec 3 2009, 12:38 PM)

Posted by: bfrymire Dec 4 2009, 01:22 AM

Sign me up for two sets also.

-- brett

Posted by: Mikey914 Dec 4 2009, 01:37 AM

I finally got these cut and the fitment looks good on the assembly I've been working on. They are close to the thickness of OEM and are contoured for the corners. I had a little bad luck with my 914 today and wound up having it towed to the shop to survey the extent of the damage.

I'll be double checking the fitment in the morning and taking some pictures I don't want to take any money until these are 100%, but they're 95% right now ( need to clean up the profile slightly and make a few minor adjustments to make it cleaner.

I'll be able to start the mailing to all of those of you that have signed up tomorrow evening. These will also be a bonus item for those of you that have signed up too. I'll elaborate more tomorrow evening.


Attached thumbnail(s)

Posted by: Mikey914 Dec 4 2009, 11:02 AM

Success, these fit nicely I'll be posting the pictures this evening and sending out the form letter. Looks like I'll be doing alot of cutting this weekend.

Posted by: sixgt Dec 4 2009, 10:24 PM

Hi Mikey,

Can I still get in? I need two sets. Thanks.

Posted by: Mikey914 Dec 4 2009, 11:21 PM

Here are some pictures of the fitment. I couldn't get to it until this morning as my car was in the shop fortunately it was just the valve cover gasket.

I was very pleased with the way the material compressed to seal without putting allot of force on the housing. I pushed it into the track on the housing and then it installed nicely.


Attached thumbnail(s)


Attached image(s)

Posted by: Marty Yeoman Dec 4 2009, 11:24 PM

I'd like one set please.
Marty

Posted by: Mikey914 Dec 4 2009, 11:28 PM

Pictures installed in the track


Attached image(s)

Posted by: Racer Chris Dec 5 2009, 09:18 AM

A big vote from me for the cowl vent seals!

Posted by: rfuerst911sc Dec 5 2009, 09:42 AM

Is there a " inside " vs. " outside " or right vs. left ? Just curious as I want to install mine correctly. Thanks

Posted by: entomologist2004 Dec 5 2009, 09:52 AM

I could use a set too...Am I toooo late?? Walt

Posted by: championgt1 Dec 5 2009, 10:58 AM

Got my PM. Money sent!

Posted by: Mikey914 Dec 5 2009, 11:44 AM

QUOTE(rfuerst911sc @ Dec 5 2009, 07:42 AM)

Posted by: scottb Dec 5 2009, 11:44 AM

i'm in for a set if not too late.

scott

Posted by: charliew Dec 5 2009, 12:14 PM

It's in the mail thanks, I don't remember but I'm pretty sure the last purshase wasn't with a check but it doesn't matter to me though. Actually cash seems to be a better way to net the most profit. The cost could be rounded up. The cost of a good product that might be better than the oem part that is not available is not the most important thing in a transaction to me. Shopping online is pretty convenient especially from a knowledgeable humble, friendly manufacturer.

Posted by: 914runnow Dec 5 2009, 07:45 PM

QUOTE(Mikey914 @ Dec 3 2009, 01:38 PM)

Posted by: hedgehog Dec 5 2009, 08:40 PM

if its not too late...i'll take a set

brian

Posted by: jaxdream Dec 6 2009, 09:03 AM

Is there a recomendation for a specific type of glue or no glue at all and would it be glue both sides or which side you recomend?? As I don't want to make a mess installing the housings / seals . Thanks ...

Jaxdream

Posted by: DEC Dec 6 2009, 09:04 AM

Mark,
You got my email?

Posted by: Mikey914 Dec 7 2009, 02:28 AM

QUOTE(jaxdream @ Dec 6 2009, 07:03 AM)

Is there a recomendation for a specific type of glue or no glue at all and would it be glue both sides or which side you recomend?? As I don't want to make a mess installing the housings / seals . Thanks ...

Jaxdream

Posted by: jaxdream Dec 7 2009, 10:29 AM

Thanks for the reply Mark , I figured it's better to ask than not ask, as I'm sure there may be others with the same questions .Thanks again for producing this much needed product.

Jaxdream

Posted by: charliew Dec 7 2009, 11:03 AM

I won't be using any adhesive on any seal that fits tight in a channel so there won't be a mess that might require a paint touchup when the seal needs replacing. If you've ever used a crummy rubber part with adhesive that requires a replacement on a freshly done paintjob the replacement can be a tough job especially if the color is a three stage paint. If you think you need a extra sealing use a sylglide lubricant on the sealing surfaces and that will almost work as a glue. Water won't get past it unless it's high pressure.

Posted by: dashgod Dec 7 2009, 02:39 PM

Put me down for 2 sets please...

Dave

Posted by: ConeDodger Dec 7 2009, 10:12 PM

Just sent you a check. It is scheduled to arrive Friday the 11th. The "account number" I used when I set it up with my billpay service is Conedodger. I am leaving you in there as a Payee since you make some gUUUd schtuff! Thanks!

Posted by: detoxcowboy Dec 8 2009, 11:28 AM

I will take a set.. where do I send the money?? paypal/?

Posted by: Bleyseng Dec 8 2009, 11:34 AM

QUOTE(detoxcowboy @ Dec 8 2009, 09:28 AM)

Posted by: VoPo914 Dec 8 2009, 03:24 PM

Mark, I'll take a set.

Posted by: jaxdream Dec 10 2009, 10:10 AM

Got my seals , GREAT product, thanks Mark , just what I needed .

Jack / Jaxdream

Posted by: 914ohana Dec 11 2009, 03:21 AM

Hi... are there any more sets avail??

Thx
Mike

Posted by: Mikey914 Dec 11 2009, 11:11 AM

QUOTE(914ohana @ Dec 11 2009, 01:21 AM)

Posted by: bandjoey Dec 11 2009, 06:52 PM

Got mine. Perfect Fit! Thanks Mark

Posted by: Mikey914 Dec 19 2009, 05:57 PM

Thanks for your patience on these for there were a few that I have yet to ship, and I'm packing up the last ones right now.

You'll notice I changed the normal price on these up a little more.

The back story-

The prototype we had some issues witht the material and changed heads, getting a better result. Thought we had the problem beat. Not that easy. We were cutting on a small section 1 deep. The problem had 2 parts that we had to overcome. The first run we stacked them 3 deep and started cutting. What happened was the rubber started "flapping" creating some sections that looked like spegetti. We then tried cutting 1 deep and 4x8 sheets. There wasn't enough tension to hold the rubber and it flapped a little different, but created a high rejection rate.

We finally started placing pieces of lexan every 2nd and could do slightly larger sheets than initailly we started with.

The summary on these is that we had a rejection rate that at one point was in excess of 50%, and wasted alot of time.

The good news is we finally got it right! The reject rate is back down to an acceptable level, but the cost for manufacturing did go up. For those of you that stepped up, your seals are now worth $10 a set more than you bought them for.

I'm not writing this to whine about costs, but to give you a little insight on the production of these parts. I've got a few more comming down the pipe, and everything is going well so far, hopefully they will be easier. Without your support and understanding on these I couldn't do what I'm doing. I just wanted to thank everyone and let them know all the seals are on the way now.

Sincerely,

Mark
AKA Mikey 914

Posted by: charliew Dec 20 2009, 10:27 AM

I got my seals very fast and they look good. At the rate my other projects are comig in I hope the parts I've gotten from you and the other world venders have a good shelf life.

Posted by: Mikey914 Feb 10 2010, 03:19 PM

I'm looking at making these available with a self adhesive back. I need someone who can install in short order and provide feedback. Price is free, but would like some pictures and some feed back shortly.

Thanks

Posted by: McMark Feb 10 2010, 05:06 PM

I can install 5 min. after they arrive.

Posted by: detoxcowboy Feb 10 2010, 05:06 PM

QUOTE(Mikey914 @ Feb 10 2010, 01:19 PM)

Posted by: Mikey914 May 20 2010, 04:23 PM

Just a heads up on these, I now make them with a self adhesive back.

Posted by: RobW May 20 2010, 05:08 PM

Nice. I'll take a set... do you also have the short metal trim on top of the targa bar on each side? One of mine is busted...

Posted by: Mikey914 May 20 2010, 07:30 PM

QUOTE(RobW @ May 20 2010, 04:08 PM)