Printable Version of Topic

Posted by: SirAndy Dec 17 2009, 02:31 AM

I did some backups and other updates and ran a myisamchk on the database.


Please let me know if you have any problems with the site ...
Andy

Posted by: Sparky Dec 17 2009, 05:33 AM

"Hi my name is Sparky and I have a 914 problem."

Posted by: abbott295 Dec 17 2009, 05:46 AM

No problem for me, but as they say, your mileage may vary.

Posted by: pete-stevers Dec 17 2009, 11:26 AM

thanks Andy!

Posted by: SirAndy Dec 17 2009, 11:29 AM

"No sir, i don't have a problem with alcohol 914s. I have a problem without alcohol 914s!"

Posted by: Bartlett 914 Dec 17 2009, 11:46 AM

Thanks Andy. Connection is faster on my computer.

Posted by: flipb Dec 17 2009, 11:53 AM

Did you change the oil while you were in there? Brad Penn? Adjust the valves? Long as we're at it, you should upgrade the stock oil pump. Your server will run 4% more efficiently!!

Heck, while we're at it, you should put in a bigger master cylinder, maybe upgrade to 5-bolt hubs...

Oh, wait. We'd all go nuts if the server had to be on jackstands for 12 months.

Posted by: SirAndy Dec 17 2009, 12:00 PM

I used rack-spacers when i mounted it. Does that count?

Posted by: Elliot Cannon Dec 17 2009, 12:32 PM

Rack spacers? I've seen those in the Victorias Secret catalog.

Posted by: DEC Dec 17 2009, 12:39 PM

Gefühlt schneller

Posted by: RobW Dec 17 2009, 12:41 PM

Thanks Andy. This site is awesome!

Posted by: PanelBilly Dec 17 2009, 01:28 PM

I feel much better now. Maybe you should upgrade your name from Sir Andy to Dr. Andy

Posted by: kwales Dec 17 2009, 02:51 PM

Sor Ahndie,

Have you considered jumping the server as a method of getting the server restarted?????




Attached image(s)

Posted by: SGB Dec 17 2009, 08:09 PM

I've got a tip for her...

Posted by: ericread Dec 17 2009, 08:13 PM

Never stare directly at the sun? Errr, maybe that's not the tip you were indicating...

Posted by: r_towle Dec 17 2009, 08:55 PM

that depends.
Were they rubber spacers, or were they poly delrin?
What hardness are they?
Did you ream them out to fit?

Rich