Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Engine assembly time

Posted by: jeffdon Dec 17 2009, 05:04 PM

And now I am starting to wonder about my weber set up. Dual 40s IDFs with 30mm vents) Need some baseline jetting info.

Engine is getting modest upgrades, balancing the crank/rods/pistons/flywheel/fan, lightening the flywheel a bit.

Bumping displacement to 2055, compression to aprox 8 to 1 with the 96mm flat top pistons.

Cam is going to webcam 494.

Jets are currently:

Air correction 200
Emul. Tube f7
Mains 120
idle 65

Posted by: Jake Raby Dec 17 2009, 07:24 PM

Go F11
55 idle
200 air
125 main