What size is the nut that secures the steering wheel? Gotta take it off to change out my dash frame.
Kev
27 mm .
Jaxdream
If you are removing the frame , just unbolt the whole steering column , 4 allen head / hex 8mm socket / 13mm hex ( which ever you have ). You would probably plan on removing the column anyway.
Jaxdream
I believe a 1 1/16 standard will work too.
An impact wrench makes it easy, otherwise you'll need to figure out how to hold the steering wheel to get leverage on it.
I picked up a $8 27mm socket and used an impact wrench, 5 seconds later; viola!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)