My 40 DLRA's have only 1 vacuum port, on the carb on the passenger side, no port on the drivers side.Will 1 carb have enough vacuum to work with this setup?
So do I drill into the blank port on the carb base(same one as on the other carb) and insert a vacuum nipple?Then run a line from the canister on the Distributor and Tee off to both ports?Sorry Mallory is not what I got.Unless you wanna swap even up.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)