The left rear corner of my car got pretty wrinkled in my crash last Sept.
I am looking for a bit of sheet metal off a parts car if anyone can help.
What I want is about the last 6" of the quarter panel, going around the corner to include about 6" of the rear panel as well. I can put up a picture if more detail is required.
Thanks in advance.
I'll have that piece in June when I cut off all the body of bluecar to install glass everything.
Chris,
I may have that in my outbuilding right now. Post a pic of what you need. Add extra.
Carlos
I should have that piece in the garage. Will take a look tonight.
Otherwise it's out back.....bring a long cord for the sawzall
Thanks guys,
this is the area I want to replace, inside the circle especially.
Attached image(s)
I don't really want to straighten out this piece and weld it back in.
It's worse than it looks. I already spent an hour just getting it to look more or less like it belongs there.
Attached image(s)
Chris, If you want you can pick up my blue car, I have cut up the AC area and there is rust in the longs but no other damage
free minus seats/engine trans and a couple of other bits
Did the mini cooper guy ever do the right thing and say he fucked up?
It was a mini that punted ya?
Oh wow I didnt realize how far away from me you are, it might be silly to drive all that way, but the offer still stands
Chris - Here's a shot of the piece I've got, it has a few rust holes where the tail light sits.
Attached image(s)
That would work Ed, unless Carlos has a piece with no rust.
Carlos?
Hi,
That looks better than mine. I would need to send you two pieces. They may not be correctly cut. (My first surgery).
Attached thumbnail(s)
Thanks for checking Carlos.
Ed, when can I come up to get that piece? Sometime this weekend maybe?
Chris - I'm not sure yet of my plans for this weekend. Springfield's about the same drive for you, I'll toss it in the back of my car if you want to come up to the shop.
Anytime tomorrow or Friday, Thursday I'm leaving at 2. Look for a PM with my cell #
Thanks Ed,
I'll try to get it from you at work. I got your cell #.
Chris,
I have two parts cars with valid rear clips if you still need some metal.
Rich
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)