Anybody make a reproduction of the horn button used on the 914-6 GT. If not, any ideas? (reasonably priced) Thanks, Mark
Thank you George. I'm just not mentally ready to pay $225 for a horn button. I might try pulling the parts out of a stock 914 horn cover and see what can be done. I've just never been a fan of the X-wing look of the cover. I could live without the porsche crest if it meant the price was $25-50.
Yes, as a seller, ebay has always been good to me.
I had to try for over a year on ebay before I got a used one for less than $250. Obviously its not perfect either.
I have an original "hockey puck" from a 912 that I was last offered $300.00 for. It's still on my car. I wouldn't expect to find anything for anywhere near $25.00
As long as there's early 911 guys with money, those horn buttons will be spendy.
I saw someone selling the embosed leather cover on ebay for $50. I could live without a porsche crest. Then the black leather is about a buck. I could take parts out of trashed 914 horn cover. Then I just need a bezel and housing...?
This company does a real nice reproduction and a nice job on the thick grip steering wheel as well.
http://www.zuffenhaus.us/defaultNew.html
Probably not a bad deal as a package.
Anything to do with building an accurate 914/6GT never comes cheap! As was posted before, some of the most pricey parts come from the early 911S and look at the values of those.
Try finding the GT/911S oil filter console and thermostat! There is one listed on the early911S registry right now for $1200!
Peter
Looks like they are $250 for their "hockey puck".
If you want to stay under $25, you could go "ghetto", and get a PVC end cap, paint it black and put a Porsche sticker on it. LOL
LOL. Just choked on my cereal.
This one is still waiting for you I have it on my desk!!!!!
only 225.00!!!!!!!!!
GROUP BUY!!!
Anyone have a side view of the horn button?
let me know if want more pics of mine. I'm not sure of its origins, but it looks similar to the ones pictured already.
You could have cleaned it up before you took a pic.....
Just messin with ya! Not sure if it's plastic or not. I'm sure someone here knows.
It's metal. Chromed copper or brass. I'd polish it by hand.
thank you Mark.
See before and after, below. I removed the ring on mine and had it re chromed for about $35.00. . . . just noticed I had added a recovered dash top, too.
Attached image(s)
Cool, Thanks, I was looking to make something like that. You can buy the leather insert off ebay along with the chrome ring(chrome over brass). The ring has tabs that extend through the top and fold over to lock them down. I think I'm going to do something with a wrinkle finish instead of the ribs. I'm not looking for a copy of the Porsche buttom exactly. I just want a small horn button in place of the bat wing center on the stock wheel.
There are two types of inserts for sale on Ebay from time to time. One is leather and one is Vinyl. I have bought one of each. I cannot find the chrome ring (chrome over brass)
On they’re at this time. My ring is in good shape but could use a re-plate to be 100%
I paid over $300. For my button and the leather was dried up. I rest of it is very nice but the ring is not 100%
Bob
I have one on my six. Paid 50 bucks for the whole column out of a 68 912 in the wrecking yard. It came complete with the wheel, the clamshells, and the switches. It had a wooden rimmed wheel on it, and the hockey puck button. I sold the wheel for 450.00 to a guy with a 68 S who had to have the right part number.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)