The jack straps are taking a little longer so I wanted to add in one other item that could be combined to save money on shipping.
These are machined from 1/4" steel and powdercoated black. Installation is pretty simple.
To remove the old handle you have to drill out or shear off the heads fo the small brass rivets that hold on whats left of the old handle. Then drill the same holes with a 1/4" drill bit. The new handles have the same spacing, so that yuo can then mount using the machine screws.
I'm will be running a special on these and they can be combined with the other items coming online. Sign up here if you want one. I'll be forwarding paymant info tomorrow.
Thanks,
Mark
Attached thumbnail(s)
I'm in for 2
Dave
Great timing! My driver's side adjuster handle broke on Monday.
I'd also like 2.
2 please
I put one on my car, and they are Excellent. It is what the factory should have done right from the beginning.
Zach
Good products from a great guy I`ll take two
PM sent
I'll take 2. Thanks.
I'll take 4 Mark.
I'll take 2.
Thanks!
I don't need them but can't wait for the window caps !
adding to my shopping list
I would like two please.
Two for me, also.
Absolutely! Please add two to my order for the set of jock straps..... errrr..... jack straps.
Eric
To nice to pass up. 2 please.
2 please .
Please add a pair of these handles to my jack strap order. Thanks
Hi, I will take a pair as well. Dumb question, but do they fit both driver and passenger seats? If so, I want a pair and no need to ship right away as I want to order some other parts and please hold on to a set of those rear tailight light seals for me still please, thank you
Jamie in Japan
Im in!
put me down for two
I need one!
2 please!
Mark, I could use a pair...they look NICE> Jim
I'll take two and will take some nicer photos for you too! Looks like Andy helped you with the pics.
Let me know where to send $$ and shipping info.
I'll take two as well, no rush to ship. I'd like to see what else you have for sale.
Thanks!
8 left at this price
I need one (early car). Please forward info.
thanks
-Rob
I need 1 count me in, I am going to make a order of this and seals this week, Thanks
"Randy, you have sent $25.98 USD to Mark."
You're all paid up Mark! Thanks again.
I'll take two.
Passenger seat is missing, and Driver's will probably break at some point!
Put me down for 2 please, Mark.
I would like 2 if there are any left.
I'll take two if there are any left...also let me know when the jack straps are ready to sell (and I'll check my chassis number for the window t-s as well).
I'll take two if they are still available....
ill take 2.
I'll take two please.
Mark, I don't think you have any left, but I would like two as well. Just let me know what the new price is, cause I know they will be worth it (like all of your products).
Ken - I got you covered. I'm close to out at this price. I did have one ot 2 guys decide to wait on these, so I may have one or two more I can offer at this price.
I'll post any remaining and make available on a first to ask basis.
-Mark
two for me, too, if you have any left
sign me up for 2 ----if any left.
after you agree I'll send funds
I'll take 2, if you have any left.
Drilled out the old one and installed the new one today. easiest thing I've done so far on the car. Great job on the build of these. Thanks!
I got mine today - Love at first sight!
These things are really nice.
Thanks!
My two also showed today.
Very nice !!!!
THANK YOU (sorry for yelling)
I'll take two if there are any left. If you PM or email me your addy I'll paypal you.
Probably too late....but if there's one left I'll take it! Let me know how to pay..........
As promised:
Can't speak highly enough about the overall appearance and quality of this part. Great job and thank you for making this!
Put me in for 2 also!! paypal to?
I'd like two, paypal is good
WOW,
Those pictures are great!
Maybe I should send you a few other parts to photograph for me.
Let me know.
Anybody have any insight on installation here?
I'm having some issues and I wonder if there are two different seat tracks for one and/or two varients of these handles??
First off, I installed them just as the pictures in the first few posts and the length of the handle base seemed to be a problem. It interfered with the bolts holding the seat on.
I ended up trimming the handle back so it was close to bolt holes on the handle and it helped there but something doesn't seem right. The ratchets on the seat rail seem to rub, very tight. This is what makes mw wonder if I have early model seat runners with a late model floor frame... are there differences?
I'm sure I'm doing something wrong as this should be easy-peasy.
I do know there are 2 different types of handles that were originally made. The potmaetal ones, and later the plastic ones. These were modled off the potmetal ones, and the plastic handle I had had the same hole spacing. I did check these on my 76 and seemed to be lining up.
Please post some pictures so I can help here.
Thanks,
mark
Resolved... I had to grind some more off because the bottom of the handle was hitting the first seat mounting bolt. I probably got an early example. It seems my screw holes on the handles were mounted fairly far forward. Hole spacing is perfect, Works "perfectly" now. These are amazing.
Here's what I had to take off (love marking up Randy's artwork! ). It appears in his picture the holes are closer to this back edge which would mean "bolt on". Mine had a bit too much hanging off the bout here:
I'll take two of whatever everyone is excited about because I am a lemming!
If there are still 2 remaining I'll take them. Send me a total and I'll paypal you.
Dan
Any of these left? I could use 2...
I have made changes so they are now produced shorter and will eliminate Erics' problem.
I do have them here-
http://www.shop.914rubber.com/product.sc?productId=4&categoryId=7
This was a group buy but as I had not specified it I reduced the regular price to $9.99 until Sunday at midnight for those that missed the group buy the first time around.
SOLD!
+ ordered some other bits I could use that you had on the site...
-Thanks
Thanks got the order. This will shut off at Sunday 11:59 PM, so if anyone else wants some you can get them.
Mark,
Put me down for a pair.
Thanks,
Ken
I appreciate the bump. Just click on the link and it will take you there. I've had to automate the process slightly to keep track of everything and transition my shipping to my assistant.
It can be a full time job.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)