installing engine & computer wiring harness on a 1973 2L. there is a multi wire to a washer looking connector at rear of engine near cold start valve area. is it a ground or something else? also , where does the red wire from the aux air valve connect ? car belongs to my 91 year old dad and I have been enlisted to get it running. Thanks for any advice.
see diagrams 3/4 way down page
http://bowlsby.net/914/WiringHarnesses/
The ring connector is a ground. It has three tabs on it where you can plug spade connectors in, right?
The AAR wire goes to a single white wire on the engine harness, not the FI harness. The engine harness is the one that has the coil wires, the oil pressure sender wire, etc. in it.
--DD
many thanks, I think that will be the last of the hookups, now to see what happens when we apply power.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)