Pics are worth a thousand words, so take a look below at what I am trying to deal with.
My clutch slips a bit under load, and I see some blue oil in the bellhousing. Not a lot, but other clutch photos on here show a dry, dusty bellhousing.
I would appreciate advice on the wear to my clutch, PP, flywheel. I am not sure if I need to buy anything or just clean it all and go...and replace some transaxle seal(s). More on that later....diner is almost ready
The disk and PP are only 2 years old, less than 5 k miles and 6-8 AX races.
Attached image(s)
Cleaning won't help, the surface looks glazed.
Fix the leak(s), have the flywheel and pressure plate resurfaced and get a new clutch disk.
Don't forget to check the pivot ball for leaks as well ...
Andy
I can help you replace the seals if you wanna lug the transmission up to Sonoma. I've got all the tools that make it easy.
Hey Limo Team,
Thanks for the advice. McMark - you have a voicemail, reply here or call me.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)