Just like the late end caps these were needed, so I'm making them. They will be ready in about 3 weeks and will run $24 a set (both left and right) in rubber in the pre-buy.
I really feel the rubber is a much nicer finished product, so unless there is demand for the plastic, I don't see the point in going that route.
I will also have some more early style items coming very soon too. In fact they should be ready before these, but we'll see.
Just add you response to the thread and I'll let you know the specifics when they're ready to start shipping.
Mark,
I'm in for 5 sets of the early style end caps
1 set for me please
I'll take a set.
Hi, count me in for one set please!!
I definitely need a set.
I am in for two sets!!!
Sorry to be a dunce, but where do these go? Does someone have a picture?
Thx,
Skip
Sorry no pic yet
They are placed at the end of the outer door window seal.
These are different to the later style from 73-76 and NLA,
so I'm happy that Mark make them.
I'm in for one set. Thanks!
I need a set and my car is a 73, so is that early or late
1 set for me - thx
Do you make/sell the late models ones too? If you do, I'll take a set.
Hmmm... Still unsure where I would find them. I guess inside the door near the back. I'm not about to fumble around in the garage at 6am, nor am I willing to take my door apart to tell if I have them or not. Put me down for a pair...
Skip
I just paypaled you for a set Mark. I'll also get the early cap off to you tommorow. Thanks
Mine are on the car and they are awesome! A must have if yours are falling apart....
I can use a set also. Have these been produced yet?
I'm in for a set.
I need a set please.
Mike
Mike, I'll take a set for a later model (76) in rubber. Please pm me pay pal info.
Thanks,
Rick
I think I committed to these in an earlier posting. I'll definitely take a set.
Received my late model rubber end caps yesterday. Great stuff, Thanks Mark
I'll take one set. Glad to see this part come up I was contemplating having a mold built to make them.
Jsaum
I need at least one set (pair)--will check the other car this weekend and will let you know about a second set.
Thanks for doing these!
Steve A-
I need a set for my '72. I received the late model set last week - thanks!
any news?
Up date on these. First parts will be ready after WCR May 18th is, with production that week. I will not collect any money on these until I've got my first article in hand (with pictures posted). I would have later this next week, but I'm taking off 3 days for WCR.
Which style do I need if I have an early 73? Late style regulator but no door reinforcement.
Hi Mark,
What's status of the end caps?
I need them to finish my car.
Should be done in about 2 weeks, maybe less. Just reworking the part of the dies on the edges.
-mark
These are FINALLY done!!!!
Below are the pictures of the first parts.
I also learned why these were so hard to find in one piece (See below).
Attached thumbnail(s)
Attached image(s)
Apparently one of the reasons the edges seem to be all broken out on most of the examples I could find what the sheet metal at the edge toward the front (on the side with the long lower track-inside) is often bent. You can see the edge of the metal is not straight. When I tried to fit I noticed it didn't quite fit, but I could push it down. Until, it started to crack out the edge, then, it fit.
Moral of the story, you may need to straighten the sheet metal where they fit.
Attached thumbnail(s)
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)