Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 4x130 to 4x100 wheel adaptor rim offset

Posted by: celluloid3 Mar 23 2010, 09:48 PM

Hi- I'm looking at these adapters to convert the 4x130 to 4x100 lug pattern, but
they will have a serious positive offset, can anyone help me out with what rim offset
might fit? I'd like to get 17" rims or 18" (not sure a 18 will clear). Anyone have the
knowledge to help me figure this out?

Thanks.
Marko

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...RK%3AMEWAX%3AIT

Posted by: RJMII Mar 23 2010, 09:57 PM

This listing () has been removed, or this item is not available. your URL was truncated when you copied and pasted it in to this thread.

Posted by: celluloid3 Mar 24 2010, 09:58 AM

Well as my gut feeling was that they are too dangerous to use,
I am no longer thinking about trying them out...

Posted by: tat2dphreak Mar 24 2010, 10:05 AM

QUOTE(celluloid3 @ Mar 24 2010, 10:58 AM)

Well as my gut feeling was that they are too dangerous to use,
I am no longer thinking about trying them out...

good thinking, I don't trust adapters

you can get a shop to re-do your rotors and press in studs if you really want, but you'll have to do the rotors at every brake job.

I bit the bullet and am doing 5 lug, bigger brakes, less hassle, great rims choices...

Posted by: Dr Evil Mar 24 2010, 01:36 PM

One drawback to doing the 4 lug 4x130 is that there are limited rims, 4x100 has a but load as they are stock honduh, 5x130 is a Porsche only (911, 944, 924S, boxter) offset so even though there are more rims, they are more expensive. That always bothered me. I still went 5 lug, though.