Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Pictures of cutaway heads
Posted by: johannes Apr 5 2010, 01:22 PM
There was a thread about heads were a few very interresting pictures were posted. Theese pictues showed heads cut in two and were showing the differences between 1.7 and 2.0 heads internal.
I think the pictures were not posted on the forum but there was a link to anotehr website.
After one hour search I cant find it ! ...
Posted by: johannes Apr 5 2010, 02:05 PM
Found one picture in a post, but ther were more ... Do you know where they come from ?
post-2-1137135527.jpg
Posted by: kwales Apr 5 2010, 02:08 PM
They were posted on shoptalkforums a number of years ago.
Posted by: aircooledtechguy Apr 5 2010, 02:20 PM
Those are mine. I have them displayed in my shop. If you want different shots, let me know. . .
Posted by: jcd914 Apr 5 2010, 02:31 PM
Found one picture in a post, but ther were more ... Do you know where they come from ?
post-2-1137135527.jpg
These don't look like they are labeled correctly.
The left side looks like a 2.0L and the right looks like a 1.7L or 1.8L
1.7 did not have an air injection port into the exhaust as seen in the left side picture.
The exhaust outlet looks bigger on the left side compared to the right side.
And the spark plug angle on the right side looks like 1.7/1.8 not 2.0.
Jim
Posted by: johannes Apr 5 2010, 02:40 PM
Those are mine. I have them displayed in my shop. If you want different shots, let me know. . .
Thank you for your fast answer ! If you have the pictures available, could you post them again here ? I can remember they were very instructive ...
Posted by: aircooledtechguy Apr 5 2010, 02:42 PM
These don't look like they are labeled correctly.
The left side looks like a 2.0L and the right looks like a 1.7L or 1.8L
1.7 did not have an air injection port into the exhaust as seen in the left side picture.
The exhaust outlet looks bigger on the left side compared to the right side.
And the spark plug angle on the right side looks like 1.7/1.8 not 2.0.
Jim
These are VW Bus heads NOT 914 heads. That's why they may be a bit confusing here. They were originally posted on a VW website
Posted by: johannes Apr 5 2010, 02:53 PM
These don't look like they are labeled correctly.
The left side looks like a 2.0L and the right looks like a 1.7L or 1.8L
1.7 did not have an air injection port into the exhaust as seen in the left side picture.
The exhaust outlet looks bigger on the left side compared to the right side.
And the spark plug angle on the right side looks like 1.7/1.8 not 2.0.
Jim
These are VW Bus heads NOT 914 heads. That's why they may be a bit confusing here. They were originally posted on a VW website
OK, so 914 look very different ? ...
Posted by: McMark Apr 5 2010, 05:47 PM
Nate, did you cut anything besides the 1.7 and 2.0Bus Squareport heads?
These types of pictures would be perfect for putting in Parts Vault entries for cylinder heads.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)