Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Tailshifter shift rod refurb...

Posted by: slu234 Apr 7 2010, 07:46 AM

My `70 tailshift rod is worn at the tranny end. This is where the finger drops down into the tranny shift lever.

Does anyone have some photos they could share of what an unworn or refurbished shift rod finger looks like?

Side shift conversion is not in the cards at this point in the game.

Thanks,
Brian

Posted by: realred914 Apr 7 2010, 11:38 PM

QUOTE(slu234 @ Apr 7 2010, 06:46 AM) *

My `70 tailshift rod is worn at the tranny end. This is where the finger drops down into the tranny shift lever.

Does anyone have some photos they could share of what an unworn or refurbished shift rod finger looks like?

Side shift conversion is not in the cards at this point in the game.

Thanks,
Brian



hanyes book fig 5.28 shows it kind of small.

the tail shift is good, with new bushing, not all that bad at all. hardly worth the conversion effort if youget your all re-bushed. save yoru money!!!!

Posted by: jimkelly Apr 8 2010, 06:33 AM

for those who would like a photo of a non-refurbished one.


Attached image(s)
Attached Image

Posted by: slu234 Apr 8 2010, 11:45 AM

Thanks for the photo!! That will help a bunch. Wasn't sure if some of the areas were worn or machined that way.

Thanks,
Brian

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)