I want to figure out the engine harness for my 3.0 but I'm looking for some assistance. Here's the stats
I have the original harness from the 3.0
Engine did have CIS, but I'm converting to carbs
Internal regulator
No relay board
All the connectors I have are broken including the one that connects from the body harness to the relay board
I want the cleanest wiring connection from the car to the engine I can get. Since my connectors are all crap, should I convert to another style of connector or stick with the OEM style since the pins are still on the ends of the wires.
Just what do I need to wire up? The starter and the altenator and gauges? What lines need relays and do I use the relay connectos from the headlights or has someone come up with a better idea?
Perry Keihl or Patrick Motorsports has the solution for you.
The factory connectors are going to run you around $85 for the pair you need, unless you can scrounge a salvage connector for your body wiring harness.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)