I need some, but my local flaps has none. Where can I find some??
Machine shop? Google? Yellow pages?
OSH
aka Valve Grinding Compound Auto Zone used to carry it NAPA maybe
a real auto parts place like NAPA should have it. NAPA sometimes will have a store connected to thier warehouse in larger cities. This store has it all.
Make your own... mix some Ajax with a tad bit of water to gain the consistency you are looking for. It works better than anything that I have bought.
Make some. Use oil/grease, mix in some of that old fashioned cleaning or scouring power. It'll work just fine.
I used that a few times when I was in the Navy and the closest FLAPS was weeks away. It worked on lapping valves, polishing bores, and when I lapped the side of piston rings I made for a 5th stage piston on a 5000psi compressor.
Good Luck, Don
Let me geuss, the pimped faced kid at the counter never even heard of it. At least that's what I keep running into. Try NAPA
McFadden-Dale Hardware carries Clover Brand. I pick some up about a month ago. Stores are located throughout the LA/Orange County Area.
http://mcfaddendale.incomsupply.com/
All of the FLAPS around here carry a little tube of the Permatex brand lapping compound. NAPA/Autozone/Advance/broadway - they all have it.
Zach
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)