Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Look what's new at Automobile Atlanta
Posted by: dr914@autoatlanta.com Apr 23 2010, 09:17 AM
Posted by: Phoenix-MN Apr 23 2010, 09:22 AM
Engine Lid cable pulls
Posted by: patssle Apr 23 2010, 09:23 AM
Where's the pic of a pantless guy sitting in a big pile of them? 
Posted by: Krieger914 Apr 23 2010, 09:37 AM
The white thingies are supports for the door latch rod?
Posted by: dr914@autoatlanta.com Apr 23 2010, 09:48 AM
The white thingies are supports for the door latch rod?
nope! But they actually perform two jobs on various 914 models.
Posted by: dr914@autoatlanta.com Apr 23 2010, 09:49 AM
Where's the pic of a pantless guy sitting in a big pile of them?
We could not make enough to modestly cover his bare legs
Posted by: Root_Werks Apr 23 2010, 09:51 AM
White thingies for holding break lines? the hard lines under engine shelf?
Posted by: dr914@autoatlanta.com Apr 23 2010, 09:51 AM
Engine Lid cable pulls
YES! The base and the knob! As many of you know, Porsche substituted the original style engine release knob with their 911 type "T" handle which is certainly not correct (PAT!) but maybe is easier to use. This one is concours correct and replaces the long discontinued factory unit.
Posted by: Jeff Bowlsby Apr 23 2010, 10:19 AM
Single spark plug wire clips. OOOOOhhhhhhh!
Posted by: Root_Werks Apr 23 2010, 10:29 AM
Single spark plug wire clips. OOOOOhhhhhhh!
Don't those have two places? These only have one spot. Just like the clips that hold the hard brake lines in place. I bet that's what they are!
Posted by: MrKona Apr 23 2010, 10:35 AM
Single spark plug wire clips. OOOOOhhhhhhh!
Slight hijack here, but those spark plug wire clips are still available. I recently bought a couple. 113-905-451-A.
Okay, back on topic...
Posted by: bob Apr 23 2010, 11:06 AM
The little white clips are ALSO for holding the fuel line to the back firewall on a 914-6...
I'll take 2!
-bob
Posted by: Root_Werks Apr 23 2010, 11:10 AM
Those look too small for fuel lines to me. 
Posted by: 9146986 Apr 23 2010, 09:44 PM
I'm with Bob on the white clips. The knob and trim piece are too easy George!
Nice stuff!!
Posted by: Pat Garvey Apr 24 2010, 07:46 PM
Engine Lid cable pulls
YES! The base and the knob! As many of you know, Porsche substituted the original style engine release knob with their 911 type "T" handle which is certainly not correct (PAT!) but maybe is easier to use. This one is concours correct and replaces the long discontinued factory unit.
Geo,
I'm confiused!? Why do you rhink I wouls have a T-handle release?
Pic attached.
Pat
Attached image(s)
Posted by: FourBlades Apr 24 2010, 08:51 PM
The little white things clip on to the bar that connects the engine cooling flaps.
John
Posted by: burton73 Apr 25 2010, 01:55 PM
Do the white things hold the rods on the doors that pull the door open?
Bob
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)