Hi, my rear view mirror is cracked and damaged beyond repair and I have a nice spare one I got from Bruce (thanks!!) I have the adhesive sticker and am ready to install the mirror, but before I do anything I would like to ask for some advice from you people on how can I remove the old mirror without damaging the nice somewhat fresh front windshield I have on now? I did a search but am not coming up with anything...would a hair dryer work? Sorry if this is a dumb question, I thought I would ask here first before trying anything...thanks and cheers
I have just pulled them off but If it was me I would call a auto glass shop you might be familiar with if someone here doesn't respond pretty soon. I probably would still call my favorite glass shop to compare replys anyway. I think I remember using some laquer thinner on one to get it softened up before I pulled it off. I know thats what I used to clean the residue up.
You don't really have to take the windshield mount off to change the mirror , there is a small screw that holds the mirror to the windshield mount , it is inside of the "stem " that the mirror is attached to .The screw head is slotted , use a very good small slotted screw driver , work with it for a bit or it may come right on out. You might apply a little heat ( not a lot so as to not melt anything ) which will aid in the removal of the screw , it is long but very small diameter . Good luck , maybe give it shot before trying to unglue the windshield mount.
Jack / Jaxdream
I was having a heck of a time trying to get a mirror off of a parts car. Then I took the heat gun to it. Thing popped right off.
The 2 or so I've dealt with popped off rather easily..
Thanks, I will try to unscrew the mount, I didn't even notice that, thanks!! I actually installed the mirror last year or so and yes it sticks well to the glass for the time being. I bought the adhesive sticker at HPH and it works well but unfortunately the mirror cracked and needs replacement and I have a spare here so thought to do it myself.
Thanks, my car needs a lot of work but slowly it is coming along. Cheers!!
I glued my mirror on with some aircraft grade epoxy that we have at work. I was on my way to get the car inspected for registration and the mirror fell off in my hand. I didn't think about removal at the time. When the time comes hopefully it will come off with heat because it isn't coming off any other way.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)