Everything hooked up, I get the 3-wipes when the squirter is actuated, but no delay action when the wiper arm is moved "down".
It could be a bad relay?
I did:
Red/blk on the motor
blue to green (Switch to relay)
Grn from relay to motor (From the removed green now hooked to blue on relay)
Brn to ground on motor
Brown from switch to relay (this works fine).
Did I miss something?
Turn key on.
Put wiper lever into delay position.
Check all the wires going to the relay for 12vdc.
Rich
Did you break-off the tab that allows the selector into the delay position ? You end up with: Off, Low, Fast, and Delay
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)