Ok I serached and cant find the reference. I have koni reds and would like to do a coil over kit on the rears.... I think its some kind of circle track part house out west????? Ideas??? Names??? links?????
Thanks
Try Ground Control in CA. Sorry, don't have the link handy.
Andys
I also have new Koni Red's all around and have looked (although a meeger effort) for coil overs without avail.
I would be interested in adjustable perches. Especially if I could utilize the two pairs of Weltmeister springs that I currently have.
I will keep an eye on this thread. Please pm me if you have better luck than I.
thanks
i had a link to a coleman racing option, but that page is obsolete.
nope, standard koni's...reds are larger hence the issues..oh and I really do know how to spell,,,searched.....?!! Cant type worth a shit though!!!
How about Tarret Engineering?
I contacted Coleman. Thanks for the link!
Here is what I said:
Enquiry: Is your ""coil over kit 5"" compatible with koni - red shocks? Application 1974 porsche 914
Reply:
The inside diameter of our shock sleeves is 2.04 or 2.08. If the Koni shocks are about .010 smaller then the I.D. of the tubes they will work.
Regards,
Lary
Coleman Racing Products
(800) 221-1851 ext 122
colemantech@czo.net
My suspension is completely assembled. Does anyone have the O.D. of the Red rear shocks lower tube? I will be by my car tomorrow night and will mic it.
Pete
i think, 2.15....but wil not see car until saturday.. The guy at the circle track place measured mine.... I need to verify, he or my memory could be bad
The Rear set-up on 914s is already a Coil-over set-up, Are you looking for Adjustable Perches?
yes sorry, adjustable
Check with Rich Johnson, member name is "a914guy" here on the site. Great guy, very friendly, very helpful. My setup came from him.
Reid
I have the Coleman setup on my car, but they have to be machined to fit. A guy I work with bored mine to fit for a six pack...
call Ira at Tarett. he is friendly and knows what will work
Here's the link to Ground Control
http://www.ground-control-store.com/products/description.php/II=76
Jay is a Porsche guy, and knows his shocks. He fit me up with perch's and springs for my dual adjustable Koni's
Andys
Attached thumbnail(s)
I got my bicknell sleeves for my red konis from behrents.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)