Printable Version of Topic

Posted by: Type 47 Jun 3 2010, 11:19 PM

Just got a 75 2.0 that has had dual Webbers replace the fule injection...

Do carb conversions require a different cam?

do just bolting on carbs do the trick?

Posted by: jimkelly Jun 4 2010, 04:23 AM

good advice below.

Posted by: Vacca Rabite Jun 4 2010, 06:02 AM

Carbs require a different cam to run *at their best*. But the car will run on the stock cam using dual carbs. You will just be leaving power on the table.

Zach

Posted by: ME733 Jun 4 2010, 07:29 AM

.As you just got the car, ....sort it out first. optimize the carburator settings and jetting...for that camshaft/piston cylinder, head combination...optimize the ignition timing...the "OEM" stock camshaft works with fuel injection, and will work just fine with carburators with a little tuning.Carburator CAMS will have more duration,(and generally) more lift, which is why they work better,produce more H.P., and at higher rpms........optimize what you have first.

Posted by: tat2dphreak Jun 4 2010, 09:25 AM