Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ does anyone know qrs fiberglass?
Posted by: rickthejetman Jun 7 2010, 02:39 PM
hi i saw this guy qrs fiberglass on ebay he's real close to me so i can pick up the parts ( save a ton on shipping) and i was wondering if any of you have does buisness with this guy? ebay user name zero-kewl914.
Posted by: quadracerx Jun 7 2010, 05:13 PM
I think this link:
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=107334
is the same guy...I was planning on buying some fenders and rockers from him too...evenutally....Wonder if he makes or can make a set that is wider than the original 914 GT ones?
Hope this helps...
Steve
Posted by: rickthejetman Jun 7 2010, 05:24 PM
I think this link:
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=107334
is the same guy...I was planning on buying some fenders and rockers from him too...evenutally....Wonder if he makes or can make a set that is wider than the original 914 GT ones?
Hope this helps...
Steve
that looks like his fenders but i dont think thats him building that car. the qrs guy is in Hemet, CA and the guys building that car are in NC
Posted by: sww914 Jun 7 2010, 07:59 PM
I've installed some QRS parts. They're as good as most, just a bit cheaper.
Posted by: rickthejetman Jun 7 2010, 09:23 PM
I've installed some QRS parts. They're as good as most, just a bit cheaper.
Cool thats what i wanted to hear
Posted by: quadracerx Jun 7 2010, 09:26 PM
I wonder why the QRS guy doesnt post on here as a member or member vendor? Seems like he could get alot more business if he used the "world" to help market his products....
Steve
Posted by: rickthejetman Jun 7 2010, 09:48 PM
I wonder why the QRS guy doesnt post on here as a member or member vendor? Seems like he could get alot more business if he used the "world" to help market his products....
Steve
Maybe I'll email him and tell him about us. Maybe I'll get a discount
Posted by: raw1298 Jun 14 2010, 06:55 AM
I have the flares all the way around. He made mine thicker for a daily driver. Great guys to work with.
Posted by: sean_v8_914 Jun 14 2010, 07:15 PM
Jeff knows about us. he was at teh last D&G in riverside
Posted by: sean_v8_914 Jun 14 2010, 07:22 PM
...and I like his work. I have 11pound lids on teh 10jereen. we have also installed the coromat type on street cars. it is slightly heavier but much more rigid.
talk to Jeff at 951 581 5537
Posted by: rickthejetman Jun 14 2010, 07:57 PM
...and I like his work. I have 11pound lids on teh 10jereen. we have also installed the coromat type on street cars. it is slightly heavier but much more rigid.
talk to Jeff at 951 581 5537
thank you guys for all your great feedback. i think i'll buy some rockers from him and give it a try. i need lots of fiberglass parts. and i'll get them one at a time
Posted by: matthepcat Jul 1 2010, 11:33 AM
I just received his front and rear bumpers. They seem to be of very good quality with good fit. My only small complaint is the bumpers were not shipped with a protective plastic over the gel-coat, so there was some small scratches and abrasions.
I will get some photos up when I get them fully installed. I recommend calling the shop directly and ordering over the phone, as the owners son runs the e-bay account from England and tends to be slow to process orders.
Matt
Posted by: martman Jul 14 2010, 07:08 PM
You can go his website at http://www.qrsfiberglass.com and order it directly from there. I help put his website together and we are trying to get the word out.
I talked to Jeff about getting on with world as member vendor.
We shall see.
We have new Boxster parts coming out along with new fiberglass 912E engine tin for both 1.8 & 2.0 heads
Posted by: tadink Jan 6 2013, 12:27 PM
You can go his website at http://www.qrsfiberglass.com and order it directly from there. I help put his website together and we are trying to get the word out.
I talked to Jeff about getting on with world as member vendor.
We shall see.
We have new Boxster parts coming out along with new fiberglass 912E engine tin for both 1.8 & 2.0 heads
<DANGER DANGER> THE Website had MALWARE that my virus checker flagged - don't go there - it is the stuff that they use to steal identities - is there a phone number for the shop somewhere? I've got some of his fenders and would like to talk about how they suggest the installation should proceed.
td
Posted by: sixnotfour Jan 6 2013, 12:33 PM
...and I like his work. I have 11pound lids on teh 10jereen. we have also installed the coromat type on street cars. it is slightly heavier but much more rigid.
talk to Jeff at 951 581 5537
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)