Printable Version of Topic

Posted by: Red-Beard Apr 6 2004, 09:29 PM

Last time I checked - Nov 2003

http://www.the-best-source.com/import_auto_parts_catalog.asp?make=PO
Slider 2-5 (177.36)

Pelican Parts - synch hub

http://www.alldiscountautoparts.com/Porsche-Parts.html

slider 1st - 336.56
Synch rings - 55.30

Posted by: bernbomb914 Apr 6 2004, 09:58 PM

It was me Thanks

Bernie

Posted by: Aaron Cox Apr 6 2004, 11:01 PM

i talked to you about it a little bit.... (punk kid looking for chrome windshield squirters
)

Posted by: L8Apex Apr 6 2004, 11:17 PM

speak of trannies. Anyone here rebuild their own before? How hard is it? Am I able to do it sucessfully? I have torn down many cars, and rebuilt quite a few engines and have done turbo installs in other cars with great success. Can I tackle a tranny rebuild?

Posted by: KenH Apr 6 2004, 11:48 PM

Yes you can, if you pay attention to the small details. There are several do-it-your self articals around. You can down load the manual from this site.

Also, I suggest you take the Jerry Woods Tranny Class first.

Ken

Posted by: lmcchesney Apr 7 2004, 08:17 AM

Another good source for parts which I have not seen here is:http://www.pap-parts.com. (Not affiliated or on commission, just local)
1st gear teeth = $97
2-5 teeth = $88
1-5 synchro ring = $49
1st/rev sleeve = $400
2-5 sleeve = $130
L. McChesney

Posted by: Bleyseng Apr 7 2004, 08:23 AM

I rebuilt mine last year and posted my progress. Swapped in the flipped 5th to 3rd too. Wasn't too hard using Redbeard info and the Porsche manuals. Lots of measuring of bits and pieces and then ordering parts.
Pretty straight forward process IMHO . Go for it before the summer starts.

A nice shifting 914 is a joy!

Geoff

Posted by: L8Apex Apr 7 2004, 09:32 AM

I have to do the reverse. I graduate from my university in May, so I can't slack off now and be working on trannies. haha. So I have to start in the summer for sure.