Printable Version of Topic

Posted by: Realcasual Jun 23 2010, 11:12 AM

[font=Georgia]Hi teener gang. I'm in the process of gathering parts for my 74 914-6 conversion. I'm having a very difficult time finding 15x7" Fuch replicas..I want to find 5 of them. Any information would be appreciated...

Posted by: carr914 Jun 23 2010, 11:34 AM

Get REAL ones

Posted by: 7275914911 Jun 23 2010, 11:47 AM

Oooops.....drivel below is for 16"



http://www.sierramadrecollection.com/store/cart.php?m=product_detail&p=632

SierraMadra Collection link

I also thought AA and a few other places on the web had them had them....

I am with TC on this tho....get real ones
Bird board has them all the time...

Good Luck
Ken

Posted by: GeorgeRud Jun 23 2010, 12:41 PM

I would also suggest to try to find some real ones. Thry were quite common for the rears of 911s and 944s, and should be available as many people have gone to larger 16" and 17" rims.

Check your clearances as 7" can be tough to fit on a nen-flared car, and are too small for the rear of a flared car. They are even somewhat small for the fronts on a flared car.

Posted by: dr914@autoatlanta.com Jun 23 2010, 12:46 PM

Those guys at automobile atlanta have plenty of them. Good quality made in Italy. Both sevens and nine inch for the rear with the factory flares.

QUOTE(Realcasual @ Jun 23 2010, 10:12 AM)

[font=Georgia]Hi teener gang. I'm in the process of gathering parts for my 74 914-6 conversion. I'm having a very difficult time finding 15x7" Fuch replicas..I want to find 5 of them. Any information would be appreciated...

Posted by: pete-stevers Jun 23 2010, 02:43 PM

QUOTE(carr914 @ Jun 23 2010, 10:34 AM)

Posted by: 914Sixer Jun 23 2010, 04:17 PM

15" diameter will really limit your tire selection. 15' tires are going away.

Posted by: underthetire Jun 23 2010, 04:37 PM

http://sfbay.craigslist.org/eby/pts/1805387346.html

16's if you want new. I saw this guy go as low as 550 I think.

Posted by: bandjoey Jun 23 2010, 10:20 PM

http://forums.pelicanparts.com/porsche-911-used-parts-sale-wanted/549543-polished-fuchs-2-6x16-2-7x16-w-polished-center-caps.html

There might be more. Check on the 911 forums.

Posted by: Jeffs9146 Jun 25 2010, 11:44 AM

Just posted on Craigslist!!

http://sfbay.craigslist.org/sby/pts/1810573560.html