I have seen a bunch of pictures on this forum with AC compressors mounted on the engine near the battery tray. i saw there was a belt comming out of the fan housing and turning the compressor. What if that compressor was actually a 225 amp alternator
i know this has never been done, and i keep telling this guy he is crazy, but HE keeps wondering if it would work
is it possible??
pics i found..
Attached image(s)
As long as he didn't have you wire it in backwards, it should work.*
It should be a matter of building a mount, a block off plate for the old alternator, rewiring it, and reconfiguring the belts. You'd need to make sure that it was designed to rotate the correct direction for the placement of said alternator.
*in reference to the positive ground thread where the backwards red and black locations got confusing.
Hmm. I don't see why not the motor would not care if it was driving an alternator or a compressor IMHO. What ya going to do install electric heat?
My concern would be spinning it backwards, as the way the pump mounted. Would the fan for the alternator not cool ( blow through) it any more? Just a thought.
Maybe an alternator from an Honda? Some of those engines spin backwards.
I got a Onan generator he could just swap out the whole engine/transaxle and run off two electric motors. It would be like driving an ocean liner!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)