Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Painting question

Posted by: jeffdon Jul 6 2010, 08:55 AM

My first layer of base coat has shown up some scratches right in the center front of the hood. This is the first layer of base. Will additional coats of base "fill" or hide the scratches? Or should i sand them out before adding more paint?

Attached Image

Posted by: detoxcowboy Jul 6 2010, 09:09 AM

I would take them out now while on your first coat, because if they still show after subsequent coats it will be more work to get them out at that time.. Good thing you noticed them now..

Posted by: jeffdon Jul 6 2010, 09:31 AM

Yeah, kinda what i have been thinking. Working from home today, so I think I will sneak out and wet sand them. Funny, I figured when i found these, the rest of the car would be loaded with them, but thats not proven to be the case, thank god. Rest of the car is looking good, but now is not the time to get smug. Plenty to screw up still.
Attached Image

Posted by: charliew Jul 6 2010, 10:02 PM

Sand them out but don't wait too long, most base coats need the top clear put on within about 24 hr or less to work right. If thats silver you won't be able to do any sanding on the final base coat or it will show up. It might be the picture but it looks like a low place on the inside of the front fender by the hood seal channel in the last picture.