Will this oil cooler work on our 914's
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=390183770460&ssPageName=STRK:MEWAX:IT
Vs. other options?
Yes the components will fit. But don't expect fantastic cooling from that sort of cooler. I recommend stepping up the a Setrab cooler.
I agree; don't use the tube type coolers. It seems like a good deal, but you probably wont be happy with the results.
In addition to the cooler you should also use a oil thermostat and a fan (which are not in the ebay kit).
There is a recent topic on oil coolers with lots of pictures.
Lot's of very good and recent information at the following link:
http://www.914world.com/bbs2/index.php?showtopic=108328&st=0
It will sorta work until it splits its guts and sends oil everywhere. Empi stuff is just garbage. I just picked up a brand new cooler out of a Police interceptor.
Setrab. Setrab. Setrab.
I just put a 12 inch Setrab (with fans) in the back of my car, and it dropped my oil temps 40 degrees. Everyone using the EMPI coolers, even with fans, seemed to only get a 20 degree change. its worths the extra money for the better equipment.
Zach
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)