Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ dumb questions cam gear/rod orientation

Posted by: speedbuggy16v Aug 1 2010, 03:22 PM

I was not paying attention when I removed the old cam and did not mark it. So now I have 5 options on how to mount the cam gear. the slot should line up close to lining up with the dot on the gear like a T1 vw I assume? The second question is on the rods, notches for bearing tabs down correct?

Thanks,

Corey

2.0 914 BTW