Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ anyone have a picture of

Posted by: qa1142 Aug 7 2010, 05:58 AM

Well if it fits may be bitchin

Who has rear shot and wheel well shots of 15"X7" 5 lug fuchs on narrow body?

I didn't think they would fit confused24.gif

If you put 205 50 x 15 on 6" in front and 7" in back how will diameters effect things?

help please my education continues

Along with my endless enjoyment of my car drooley.gif

Posted by: JRust Aug 7 2010, 06:38 AM

7" fuch fit fine but can be a little close in back. Depends on what tire you use. With 205/60 or a lower profile 205/50 you shouldn't have a problem. I have 16x7 fuchs on all 4 corners with 215/45's. My passenger side rear needed just a minor pull to fit


Attached thumbnail(s)
Attached Image

Posted by: qa1142 Aug 7 2010, 06:58 AM

so for all you tire wizards

if I put 15X6 on front and 15X7 on rear

Do I run same tire on all 4 corners? or do I run 215 45 in rear and 205 50 in front etc?

how do I get same diameter on wider rim?

Good to know they will fit, I love a staggered look

Thanks
Will

Posted by: RobW Aug 7 2010, 07:04 AM

QUOTE(JRust @ Aug 7 2010, 04:38 AM) *

7" fuch fit fine but can be a little close in back. Depends on what tire you use. With 205/60 or a lower profile 205/50 you shouldn't have a problem. I have 16x7 fuchs on all 4 corners with 215/45's. My passenger side rear needed just a minor pull to fit


Man Oregon is beautiful... any room for CA refugees?

Posted by: Eric_Shea Aug 7 2010, 08:45 AM

No... Medford is full. If you CA plates and you stay too long, they come after your car with chain saws! ohmy.gif

Posted by: ConeDodger Aug 7 2010, 08:59 AM

QUOTE(Eric_Shea @ Aug 7 2010, 06:45 AM) *

No... Medford is full. If you CA plates and you stay too long, they come after your car with chain saws! ohmy.gif


And they have A LOT of chain saws...

Posted by: SLITS Aug 7 2010, 09:01 AM

Have 15/7 cookies on all 4 on the six conversion. Driver's side rear is very close with 185/65/15, but then I'm not a real racer anymore.

Oh, no pics ... I'm to lazy.

forget Boregon and the PNW ... you have to quack to live there and I am fully capable of pumping my own gas.

Posted by: Sleepin Aug 7 2010, 09:03 AM

http://www.videovat.com/videos/1795/giant-chainsaw-rips-car-apart.aspx

blink.gif

Posted by: SLITS Aug 7 2010, 09:14 AM

QUOTE(Sleepin @ Aug 7 2010, 08:03 AM) *

http://www.videovat.com/videos/1795/giant-chainsaw-rips-car-apart.aspx

blink.gif


Way to messy ... the M3 that got cut in the James Bond movie was much cleaner ... Hooray for Hollywierd.

Posted by: campbellcj Aug 7 2010, 09:46 AM

Bit of an older pic but these are 16x7's with Hoosier 205/45R16's. Max negative camber and fender lips pulled n' rolled. Previously I used 15x7 cookies with 205/50's and they fit fine.

IPB Image

Posted by: underthetire Aug 7 2010, 10:52 AM

7X16 late dials with 205/50 and 1 1/4 spacers all the way around.


Attached thumbnail(s)
Attached Image

Posted by: jmill Aug 7 2010, 10:58 AM

QUOTE(ConeDodger @ Aug 7 2010, 09:59 AM) *

And they have A LOT of chain saws...


Rumor is the women up there use them when they finally decide to shave their legs. sawzall-smiley.gif

Posted by: sixnotfour Aug 7 2010, 10:58 AM

QUOTE
Man Oregon is beautiful... any room for CA refugees?


uh that pic is Bremerton WA.

Posted by: qa1142 Aug 7 2010, 01:21 PM

QUOTE(campbellcj @ Aug 7 2010, 07:46 AM) *

Bit of an older pic but these are 16x7's with Hoosier 205/45R16's. Max negative camber and fender lips pulled n' rolled. Previously I used 15x7 cookies with 205/50's and they fit fine.

IPB Image


This is where I am heading aktion035.gif

Posted by: Bleyseng Aug 7 2010, 02:34 PM

QUOTE(sixnotfour @ Aug 7 2010, 01:58 PM) *

QUOTE
Man Oregon is beautiful... any room for CA refugees?


uh that pic is Bremerton WA.


and its not full and you Cali guys are welcome to fill it up! lol-2.gif

Posted by: Nürburg Nomad Aug 8 2010, 02:24 AM

Slightly off topic but if someone has a clean pair of 16x8 Fuchs with the black center and polished lip I've been looking for a set! biggrin.gif

Posted by: burton73 Aug 8 2010, 12:49 PM

My 74 before I got it from –duc. It had 7’ with 215/45/16 back and front and the fenders are pulled just a little. ¼? but the edge of the well is rolled in the back.

Bob


Attached Image

Posted by: Bleyseng Aug 8 2010, 01:54 PM

or 15x7 cookies fill up space ..


Attached image(s)
Attached Image

Posted by: qa1142 Aug 8 2010, 02:03 PM

So, think I am buying 16X6 Fuchs

On my Olympic Blue like this, now do I run 215/45 or 205/50's ?

Thoughts?


QUOTE(burton73 @ Aug 8 2010, 10:49 AM) *

My 74 before I got it from –duc. It had 7’ with 215/45/16 back and front and the fenders are pulled just a little. ¼? but the edge of the well is rolled in the back.

Bob


Attached Image


Posted by: Bleyseng Aug 8 2010, 04:27 PM

I went to 16x6,s with 205x50's & the ride is nice.

Posted by: pete-stevers Aug 8 2010, 05:26 PM

lets see em...i think i remember those wheels....wish i still had that brown assdragger!!

Posted by: Sleepin Aug 8 2010, 06:31 PM

QUOTE(SLITS @ Aug 7 2010, 09:01 AM) *

Have 15/7 cookies on all 4 on the six conversion. Driver's side rear is very close with 185/65/15, but then I'm not a real racer anymore.

Oh, no pics ... I'm to lazy.




I will help you oh lazy one:





Attached image(s)
Attached Image

Posted by: John Aug 8 2010, 08:42 PM

While not Fuchs, I have 15 x 7 on my car too. I like them.

Attached Image

Posted by: Sleepin Aug 8 2010, 10:02 PM

What size tires are those John?

Posted by: qa1142 Aug 11 2010, 04:14 PM

ok so I bought these 15X6 and 15X7 cookie cutters

http://forums.pelicanparts.com/porsche-911-used-parts-sale-wanted/557278-6-7-x-15-cookie-cutters.html

Going cheap route to get it done on my 5 lug, these will take my current tires. Just like the struts will take current ball joints and inserts.

Still looking for 2nd set of rims to add sticky rubber happy11.gif





Posted by: type2man Aug 11 2010, 05:08 PM

QUOTE(qa1142 @ Aug 11 2010, 06:14 PM) *

ok so I bought these 15X6 and 15X7 cookie cutters

http://forums.pelicanparts.com/porsche-911-used-parts-sale-wanted/557278-6-7-x-15-cookie-cutters.html

Going cheap route to get it done on my 5 lug, these will take my current tires. Just like the struts will take current ball joints and inserts.

Still looking for 2nd set of rims to add sticky rubber happy11.gif



Those should fit fine. I tried 16x7 with a 205/50/16 and it fit on the left side but the right side was just up against the inner lip(worn suspension bushings blink.gif ). Plus I think a few other people have said that one side has more space than the other.

Posted by: qa1142 Aug 11 2010, 05:14 PM

how about 195 55 x 15

Posted by: Bleyseng Aug 12 2010, 04:37 AM

QUOTE(pete-stevers @ Aug 8 2010, 08:26 PM) *

lets see em...i think i remember those wheels....wish i still had that brown assdragger!!
This is the only pic I have! I never got around to taking pics after the swap. headbang.gif



Attached image(s)
Attached Image

Posted by: reverie Aug 12 2010, 08:25 AM

beerchug.gif

Posted by: John Aug 14 2010, 09:20 PM

QUOTE(Sleepin @ Aug 8 2010, 08:02 PM) *

What size tires are those John?


They are 205/60 R15 on all 4 corners. Not the highest performance, but it is a street car and the speedometer is relatively accurate.

Posted by: Sleepin Aug 14 2010, 11:15 PM

QUOTE(John @ Aug 14 2010, 09:20 PM) *

QUOTE(Sleepin @ Aug 8 2010, 08:02 PM) *

What size tires are those John?


They are 205/60 R15 on all 4 corners. Not the highest performance, but it is a street car and the speedometer is relatively accurate.


I just got mine on today piratenanner.gif 205/50's on 15x7's. I need to massage the rear fenders just a tad, but I am extremely happy!

IPB Image

Posted by: John Aug 15 2010, 09:38 AM

QUOTE(Sleepin @ Aug 14 2010, 09:15 PM) *

QUOTE(John @ Aug 14 2010, 09:20 PM) *

QUOTE(Sleepin @ Aug 8 2010, 08:02 PM) *

What size tires are those John?


They are 205/60 R15 on all 4 corners. Not the highest performance, but it is a street car and the speedometer is relatively accurate.


I just got mine on today piratenanner.gif 205/50's on 15x7's. I need to massage the rear fenders just a tad, but I am extremely happy!

IPB Image


Those look good on there. I like the cookies as they are relatively inexpensive and are factory parts.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)