Ok, so I am new to 914 ownership, but not to Porsche ownership. I seem to have discovered an interesting issue. The tach needle sometimes just starts "bouncing". Does not seem to be related to any other maneuvers - braking, lights, etc...
Any thoughts?
Loose or dirty connection on the coil. Or loose or dity connection on the back of the gauge.
Oh, and
Dirty points or bad tach ballest. Replace the points and condenser, reset the dwell and the timing. If the needle still bounces, replace the tach with a nice rebuilt one
Also check the bottom of the relay board for cracks. The pass-through rivets can brake lose from the solder and create all kinds of intermittent electrical issues, including a bouncing tach ...
Andy
Thanks guys
I'll check it out.
Rob
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)