Is it 7/16 x 20? IIRC
thanks
Nope .... metric .....
Can't remember if it is M10 or M12. Pitch is like 1.25 or 1.5 ... don't remember that either. They are also shoulder bolts.
I'm useless ...................
Dan, It is M10 x 1.25 Total length is 36mm and the threaded shaft is 23.5mm
thanks guys, what about the inside (tunnel side) total length...it is at least 8 mm shorter overall?
The seat belt bolts are the only non metric bolts on these cars. Yest 7\16-20 is the right thing.
If you search the net you'll find out that it is an imposed standard (DOT) on all car manufacturers for cars sold to the US. The bolt head does not have to be std.
7/16 fine is the same as 11mm, and either will work. Shoulder versions vary with application, and there are some without any shoulder at all.
The Cap'n
shit, I have been dissed.
I'm picking up my marbles and going home.
I guess my memory is better than I thought
I think those may be the same ones as those on a 72 vw.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)