Hey all, I know I've seen this, but can't find the thread(s). I want to use my foglights as daytime running lights (not as flashers). There's a way to rewire the switch so the fogs will come on w/o the headlights, right? Anyone know the procedure?
Thanks!
I haven't done it but it should be really straight forward. The fogs are driven through a relay so power draw is not an issue. Just wire pin 87 of the relay to a fuse that is hot only with the key on. Like the radio.
Depending on what it looks like on the panel it might be easier to take the red/black off Fuse 10 and move it over to the radio fuse. Then leave the fox switch on all the time.
I just did this on my car tonight. It took 15 minutes at most!
http://members.rennlist.com/demick/fogrewire.html
Yeah, that's the one - thanks!
Yes it is easy by moving a wire on the headlight switch and one on the fuse block. One turns on the lights when the headlights are on the other only on low beam. There is a complete explanation in the 914 book "Tech Tips 700" by dr 914
FWIW the Jwest kit does that, gives you flash to pass, and GREAT instructions.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)