Hi Guys,
Can someone tell me where this wire is supposed to be connected to? It is white and splits off from the insulation of the wire that goes to the distributor.
Splits off from the insulation for this wire
It's a '74 2.0
Thanks!
The white wire in the ignition harness near the distributor goes to the auxiliary air valve. It has a red wire coming out of the bottom of it.
Auxiliary air valve is intended to help the car on cold start.
It allows additional air to raise the idle of the car until the heating element heats up and closes the valve, thus giving you warm idle air from the bypass around the throttle body.
Lacking a AAV would make a tougher idle at cold temps, but little else in normal running.
Good to know, thanks for the info. Hopefully I'll be able to find the real issue soon.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)