Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Clutch adjustment
Posted by: partwerks Sep 26 2010, 10:02 AM
After getting the new bushings in it now shifts pretty decent but had to adjust the clutch a bit as it was wanting to rake reverse and 1st. A fellow enthusiast told me to double nut the bolt where you adjust the clutch as sometimes it will work itself loose.
I believe it is a 11 mm metric nut??
Posted by: underthetire Sep 26 2010, 10:19 AM
QUOTE(partwerks @ Sep 26 2010, 09:02 AM) 
After getting the new bushings in it now shifts pretty decent but had to adjust the clutch a bit as it was wanting to rake reverse and 1st. A fellow enthusiast told me to double nut the bolt where you adjust the clutch as sometimes it will work itself loose.
I believe it is a 11 mm metric nut??
The hex is 11mm, but the nut is 6mm or was it 5, can't remember now. I just bought 4,5,6, all in one shot, since they are cheap and probably gonna need them anyways. If you have a decent ACE or OSH, they do have nylocks. They work even better than double nuts for this, since you won't need to fight the two wrenches.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)