I don't have another to cross-reference
Also wasn't there someone who was converting 911 Coolers to -6
Conversion to work in a 914/6. Cut and weld. That's giant block on the end is not stock. Factory coolers have a nice curved pipe.
That should work fine, but it's not a treasure find.
Here's an original six cooler....TC.....
Don't call me a post whore....but here's a 'nother pic.....
You are just showin' off JT
Rich Johnson converted my 911 cooler for the GT clone. Welded on a -16 AN fitting if I remember correctly. Very nice quality work. Just like all the other items he provides.
It came out of a six, so I know it will work
I just didn't know which it was
It will be F/S
Thanks everybody
T.C.
I have a six cooler but curved tube was twisted my somebody with too much muscle. It would need to have a section of tube curve welded in ..Would sell fairly cheap if you wanted it ..Send email address and I will forward pic if you need it ..If not no issue.
Terry
I don't use Factory Coolers on my cars with Bigger motors.
I just wanted to check which this one was before I put it up For Sale
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)