Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 914-6 oil line support
Posted by: mepstein Oct 21 2010, 09:06 AM
Can anyone show me pics and maybe provide a pdf template for the oil line support that was unique to the six cars? Thanks, Mark
Posted by: burton73 Oct 21 2010, 10:59 AM
Can anyone show me pics and maybe provide a pdf template for the oil line support that was unique to the six cars? Thanks, Mark
I made you a template and will send it soon.
Bob B
Posted by: burton73 Oct 21 2010, 11:32 AM
Can anyone show me pics and maybe provide a pdf template for the oil line support that was unique to the six cars? Thanks, Mark
I made you a template and will send it soon.
Bob B
This PDF should be printed out at 105% to get it to fit right. It can be filed at the outside of the curve if you want. The one on my 6 was bent and this is what it looks like after I hammered it back. I used a 300 DPI Laser printer. If you cannot download this send me a email and I will send it to you.
Bob
oillineholder1.pdf ( 127.6k )
Number of downloads: 358Posted by: mepstein Oct 21 2010, 12:02 PM
Bob - Thanks for the pic and the download worked fine. Could you also get me a pic a little further back so I can get the location of the support as it attaches to the chassis. Thanks again, Mark
Posted by: burton73 Oct 21 2010, 02:52 PM
Bob - Thanks for the pic and the download worked fine. Could you also get me a pic a little further back so I can get the location of the support as it attaches to the chassis. Thanks again, Mark
Try this Mark,
Bob
Posted by: SLITS Oct 21 2010, 06:00 PM
So that's what's wrong with my six ... it doesn't have a jockstrap.
Posted by: bcheney Oct 21 2010, 08:33 PM
That is too funny.....RLMAO!!! 
My conversion won't have this...or should I ???
Posted by: SirAndy Oct 21 2010, 08:50 PM
That is too funny.....RLMAO!!!
My conversion won't have this...or should I ???Actually, if you are running a oil tank in the stock location, it's a good idea to have some sort of support for the oil line in that area.
I added a large clamp in the exact same spot on my conversion to prevent the lower oil line from flopping around ...
Posted by: bcheney Oct 22 2010, 04:45 AM
SirAndy, do you have a pic of what you did on your conversion? Thanks!
Posted by: mepstein Oct 22 2010, 05:05 AM
Bob - Thanks for the pic and the download worked fine. Could you also get me a pic a little further back so I can get the location of the support as it attaches to the chassis. Thanks again, Mark
Try this Mark,
Bob
Bob - Can you give me a shot from a wider point of view. My car never had that piece and I've never seen its location on a stock six so I'm in the dark about where it is on the car. Sorry for being clueless but I appreciate the help. Mark
Posted by: ClayPerrine Oct 22 2010, 06:10 AM
Would you be able to post the template?
Posted by: mepstein Oct 22 2010, 06:16 AM
Would you be able to post the template?
he did on post 5 of this thread.
Posted by: Eric_Shea Oct 22 2010, 07:39 AM
Download this...
I think Jeff got it to me... worked for me.
Posted by: Eric_Shea Oct 22 2010, 07:41 AM
Oooooooops... just noticed Bob already got you a template. 
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)