Printable Version of Topic

Posted by: Krieger Nov 1 2010, 09:39 PM

I thought it was a pedal from a 964 that would work in our car and was $10. The bolts holes may be different which is good because one of the bolts broke off and is stuck in the floor. Thanks

Posted by: 914Sixer Nov 2 2010, 06:04 AM

Mark has reproduction ones for $30 at 814 Rubber since they are NLA

Posted by: RobW Nov 2 2010, 07:55 AM

I have a brand new 911 $10 pedal that I decided not to use. You can have it for free if you want it... PM me.

Posted by: DanT Nov 2 2010, 08:20 AM

Andy,
I used a 964 pedal in my orange car and it worked just fine. Mounting holes are slightly different, I just slightly elongated the holes in the new pedal and it mounted perfectly on the existing studs (mine weren't too rusty and didn't break off)

Posted by: Krieger Nov 2 2010, 08:55 AM

Nice! Dan do you remember how much it was?

Posted by: Mikey914 Nov 2 2010, 10:05 AM

I'm curious too. Maybe I shouldn't have done these?????????

Posted by: bdstone914 Nov 2 2010, 10:29 AM

964-423-111-00-OEM appears to be the part you are talking about. Doesnt seem to be just a bolt in part.

the 75-89 911 gas pedal is plastic and fits without any modifications, It used to be cheap but has gone up in price to around the same cost as ours $30ish.

Mikey your part was needed.

Posted by: bdstone914 Nov 2 2010, 10:31 AM

http://www.914club.com/bbs2/lofiversion/index.php/t157842.html

964 pedal vs 914.

Posted by: Eric_Shea Nov 2 2010, 02:01 PM

What's wrong with the stock pedal? They're available from URO and Mark... no longer NLA and they bolt right in.

Posted by: 914Sixer Nov 2 2010, 05:01 PM

What Eric said.

Posted by: Krieger Nov 2 2010, 06:48 PM

Well, if it was CHEAPER and I had to adapt it anyway to account for a botched bolt hole why not?

Posted by: Eric_Shea Nov 2 2010, 06:59 PM

Cheaper than $30.00?

Don't make us chip in and buy it for ya!

You do all this mega work on your car but don't want to get a 6x1 fastener out of your floor boards? That's it Mister... you just earned yourself a

Posted by: Krieger Nov 2 2010, 07:48 PM

Well...but I....I.. Its like having another kid and going back to baby jail. Drill/tap one more frigging rusted out piece of crap....or buy a less expensive (CHEEP) part and think happy thoughts I thought it couldn't get any better than that. But you guys just want to keep bitch slapping me while Im in my happy spot. Oh well.

Posted by: Eric_Shea Nov 2 2010, 08:30 PM