Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 1.7 intake rubber
Posted by: underthetire Nov 11 2010, 10:44 AM
Looks like the rubber boots for the plenum to runners are NLA for the 1.7. Anyone come up with an alternative yet? I would like to switch to the 2.0 system, but I need to fix this first then see if I smoked my engine.
Thanks.
Posted by: dr914@autoatlanta.com Nov 11 2010, 10:55 AM
squeeze down the 1.8/2.0 variety and stainless hose clamp them if necessary
QUOTE(underthetire @ Nov 11 2010, 09:44 AM) 
Looks like the rubber boots for the plenum to runners are NLA for the 1.7. Anyone come up with an alternative yet? I would like to switch to the 2.0 system, but I need to fix this first then see if I smoked my engine.
Thanks.
Posted by: underthetire Nov 11 2010, 11:25 AM
Ha, found some coolant hose that will work. Now, anyone know how long each piece is? I'd like to cut them on the bandsaw here.
Posted by: sean_v8_914 Nov 11 2010, 11:28 AM
swag: 2.5"
Posted by: underthetire Nov 11 2010, 11:29 AM
Posted by: SLITS Nov 11 2010, 11:31 AM
Duc(k)t Tape 
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)