Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Clutch question
Posted by: schnoerrmeister Dec 18 2010, 08:04 PM
My stock clutch seems to slip a little when it's cold on the first run in AX. We typically have courses with lots of 2/3 shifts. After the first run the clutch seems to hook up fine. Should I replace w/stock or a higher performance one?
The car is a very well prepared '74 2.0 AXer ( tones of FTDs and class championships winner) with 22+ events @ 8 runs/event on a 1.2 mile 80 second courses.
Any good suggestion is highly appreciated. Thanks, Sigrid 
Posted by: jjackson Dec 20 2010, 07:13 PM
QUOTE(schnoerrmeister @ Dec 18 2010, 08:04 PM) 
My stock clutch seems to slip a little when it's cold on the first run in AX. We typically have courses with lots of 2/3 shifts. After the first run the clutch seems to hook up fine. Should I replace w/stock or a higher performance one?
The car is a very well prepared '74 2.0 AXer ( tones of FTDs and class championships winner) with 22+ events @ 8 runs/event on a 1.2 mile 80 second courses.
Any good suggestion is highly appreciated. Thanks, Sigrid
We ran kennedy clutch and pressure plates on all of our four cylinder ax cars.Good clutch for the money.It was cheeper than the 911 S pressure plates that we ran in the old days.J
Posted by: SirAndy Dec 30 2010, 03:27 PM
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)