OK, I'm not hyping this motor, I just thought it interesting that someone makes a 4 cylinder OHC flattie that you could conceivably put in a teener. Check it out in this month's Excellence magazine...daveyboy
Yep, that would be a cool engine to have if someone had too much money and didn't have anything else to spend it on. 2/3 's of a 911 "6" motor. Why not just use the whole "6"?
What I would love to see is a camless engine with the valves operated electrically thru an engine management system. Now that would be really cool!
Tom
Easy, just use F1 technology!
As with everything in life, just bring enough money!
With the -6 conversions so straighforward, it's hard to consider others. I know people like their V8 and Subaru conversions, but the car is always a bit of a bastard. Having said that, I'd love to try a LS1 conversion with an Audi automatic trans so I could have fun and not have to use the clutch (bad knee!).
As Ruf is now building a rear engined V8 911, anything is possible!
How about something like this ??
www.coatesengine.com/technology.html
Since horsepower is defined as work over time, the CSRV allows for an extremely high rpm potential. Test run at Coates' facility have seen a Ford 5.0 liter engine spin to 14,750 rpm! Though the CSRV removes the valvetrain rpm limitations, the need to have a rotating assembly that can withstand the engine speed becomes the essential element. Another benefit of this design is the extended oil change intervals, with the lubricating system not being exposed to the rigors and pollution from the poppet valve.
now thats cool
http://www.coatesengine.com/rotary_motor.html
The Auto Mfgs would love to get control , electricaly, of the valves. The valves are heavy and need a big magnet to open them. Several years ago there was a movement within the Auto Industry ( SAE) to move the world standard to 36 volts. That way you could control the solenoid needed for this operation. In addition you could elimate the altenator and starter and use the flywheel as a combo unit. I haven,t heard anything lately.
I think any electrically operated valves in a regular internal combustion engine would have to use something to assist the valve opening and closing. Maybe similar to Ducati style desmo actuation with air pressure assist. It can be done! With enough money for research and development of course. Just imagine tho', the unlimited ( programing limited I would think) valve timing changes that could be achieved to meet the needs at the moment. I wish I had the place, assistance, and money to work on a project like this. What fun that would be!!!
I think one of the first steps would be to find a valve material that is light and then use multiple valves to keep the weight as low as possible. I know one of the universities used to have a development program along these lines. Alabama? Can't remember which one for sure. I think they were trying to use air pressure assist to control the valves.
In the end, it would be too expensive at the beginning for most of us also.
Tom
I can't imagine the cost of making & getting those rotary valves to seal.....not to mention the seals/bearings themselves....then keeping them that way.
Don't hold your breath.
As for a light, strong material for valves, Matsys already makes valves from powdered metal. Root is the owner and head dude and could do this I have held some of hte valves he has made and they are super light.
I really like the Polo motor. It's too bad Porsche didn't do something like this in the late 60s to replace the aging pushrod 356 engines.
Anyone consider Inconel for valves?
can someone find this motor online?
I am not sure I am looking at the right thing.
Rich
http://www.advanceperformanceeng.com/home
see, now I was thinking VW Polo, not Deans motor.
He wants over 20k for that motor...not worth it.
Rich
Google polopolus engine and you should find it. Not much on the web site tho'.
Isn't Porsche supposed to be making a flat 4 turbo motor for the new 2014 vw-porsche car? I thought it was supposed to be some suby type thing in the porsche version of the car, and a inline 4 vw in the blue sport...
Maybe I was just dreaming all that...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)