Hello!
Is it possible to fit Flat 4 deep 6 in to a 914-4 ?
With adapters or redrilled ?
Niklas
Here is the wheel you asked for! After the success of our line of 911 style wheels in 4.5J and 5.5J sizes, we went to produce 6J deep offset version. This wheel was offered only on 1969 911 and because of it's rarity original forged wheel is sold at premium.
As same as our other line of 911 wheels, wheel is made using the latest low pressure diecasting technology and passing the strict"JWL" and "VIA" authorization standards.
This new 6J Deep 911 style alloy wheel is available in full polish and chrome versions.
Photo is DR-675D(FULL POLISHED TYPE) DR-675DA(FULL CHROME TYPE)
Parts Number Products
DR-675D FLAT4 911 STYLE ALLOY WHEEL 5LUG 6J X 15" FULL POLISHED
P.C.D. 130mm 7.16kg OFFSET+35
DR-675DA FLAT4 911 STYLE ALLOY WHEEL 5LUG 6J X 15" FULLCHROME
P.C.D. 130mm 7.16kg OFFSET+35
DR-676A FLAT4 911STYLE WHEEL CENTER CAP CHROME φ80mm
To fit any 5 bolt rims just redrill and stud the front discs and rear hubs....
That's certainly the esiest way to get it done. And it's done all the time.
Post a link to the wheels you're copy and pasting in your thread would you please? Or at least tell us where that came from. Thanks.
http://www.flat4.co.jp/english/dtail-dr.html#DR-675D
And they fit right on ??
Niklas
Deep 6's will fit a stock car without any mods. The tire size is what can cause problems.
Any six inch fuchs will fit under the stock fender wheels and a seven inch "R" wheel will fit as well.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)